剛施工的环氧地坪漆膜出現發白現象的解決方法

环氧地坪漆施工過程中，环氧地坪塗膜出現顏色不好看、發白的現象是怎麼回事呢？今天，环氧地坪廠傢就為大傢分析一下這種問題的出現原因和應對策略。根據正歐以往的施工經驗，环氧地坪漆膜發白現象是一個很常見的現象，主要出現在塗裝施工過程中或者剛塗裝完的時候，塗膜表面出現乳白色，失光，嚴重的出現微孔現象，出現這種現象主要有兩個原因：
During the construction of epoxy floor paint, what happens to the appearance of poor color and whitening of the floor coating? Today, epoxy flooring manufacturers for you to analyze the causes of this problem and coping strategies. According环氧地坪 to the past construction experience in Zhengzhou and Europe, the whitening phenomenon of epoxy floor paint film is a very common phenomenon. It mainly occurs in the process of painting construction or just finished painting, the surface of the film appears milky white, losing light, and serious micro-pore phenomenon. There are two main reasons for this phenomenon: 一是，施工時环境中的水分過多，施工場所空氣中濕度太高、或是环氧地坪塗料水分過多，就會導致塗膜發白；
First, excessive moisture in the environment during construction, too high humidity in the air of the construction site, or too much moisture in the floor coating will lead to whitening of the coating.
二是，可能因為溶劑的原因，稀釋劑、有機溶劑的沸點低，常溫下揮發太快，水汽凝積在塗抹表面，導致塗膜發白、失光、渾濁，繼而出現裂紋和小孔等問題。
Secondly, because of the solvent, the boiling point of diluents and organic solvents is low, volatilization is too fast at room temperature, and water vapor condenses on the coating surface, resulting in whitening, glossy, turbidity, cracks and small holes.
這種發白和微孔的情況，輕微的還沒有什麼問題，但是嚴重的會影響到地坪塗裝系統整體質量，所以在施工過程中，要保證相應的环境條件：溫度、濕度、風，而且使用的稀釋劑、溶劑、塗料等要合適，這樣才能最大程度地避免地坪漆膜出現發白、微孔的質量問題。
This kind of whitening and micro-porous situation, there is no problem slightly, but serious will affect the overall印花地坪 quality of the floor coating system, so in the construction process, we must ensure the corresponding environmental conditions: temperature, humidity, wind, and the use of diluents, solvents, paints and so on to be appropriate, so as to avoid the floor coating film whitening, micro-porous quality problems to the greatest extent. 。
另外，有效防止發白現象出現，施工前要準備齊全的設備，比如溫度計、測量濕度和風力的工具，如果沒有的話，就要依靠工人成熟的經驗瞭。
In addition, to effectively prevent the occurrence of whitening phenomenon, we need to prepare complete equipment before construction, such as thermometers, measuring humidity and wind power tools, if not, we need to rely on the mature experience of workers.