導致離心風機磨損的原因有哪些呢?
離心風機工作中大量的微觀粉塵會因長期積累的原因造成對離心風機軸承、葉片、電機的損害,由於粉塵的粒徑較小、種類眾多,導致很多粉塵不能有效排除,易在離心風機易損部位形成損傷。同時,一些離心風機應用單位為瞭控制成本,提高離心風機通風效果,減少瞭離心風機除塵器的應用,這會造成粉塵對離心風機的強烈破壞,加大瞭離心風機磨損和故障的風險。
A large number of micro-dust in centrifugal fan work will cause damage to the bearing, blade and motor of centrifugal fan because of long-term accumulation. Because of the small particle size and many kinds of dust, many dust can not be effectively removed, and easy to form damage in the vulnerable parts of centrifugal fan. At the same time, in order to control the cost, improve the ventilation effect of centrifugal fan and reduce the application of centrifugal fan dust collector, some application units of centrifugal fan wi环氧地坪ll cause strong damage of dust to centrifugal fan and increase the risk of wear a印花地坪nd failure of centrifugal fan.
2風機運行工況不合理
2. unreasonable operation condition of fan
位置不同、功能設定不同需要不同的風機和不同的狀態調整加以適應,而設計和實際的差距、功能和需要的差異形成瞭風機選擇的問題,極容易形成風機超負荷工作和風機磨損加劇的問題。
Different locations and function settings require different fans and different state adjustments to adapt, but the differences in design and actual, functions and needs form the problem of fan selection, which is very easy to form the problem of fan overload work and fan wear aggravation.
3風機運行速度過快
3. Fan runs too fast
運行速度過快是風機磨損的又一重要原因,根據風機磨損的數據分析,磨損程度和風機運行轉速相關,在高溫條件下風機運轉速度提升一倍,風機磨損提升3倍。
Running speed is another important reason for fan wear. According to the data analysis of fan wear, the degree of wear is related to the speed of fan operation. Under high temperature conditions, the speed of fan operation is doubled and the wear of fan is increased three times.
辛苦整理!轉載請註明來自http://www.wxmlfj.com/faq/2095.html