關於大型離心風機運行使用方面的知識

文章时间:2018-12-23 23:58:06   浏览次数:1231

前面關於離心風機的相關知識我們也講瞭不少瞭,今天我們為大傢來講解一下關於大型離心風機在使用和運行方面的知識,關於本期的主要內容如下所示:(1)、大型離心風機試運轉合格後,應在風機機殼表面包紮上隔熱層,使用絕熱材料,以便減少機殼對外的熱傳播,保護軸承的安全。而且,隔熱層的厚度應控制好,還要能夠方便檢修和拆卸。
Previous knowledge about centrifugal fans has also been talked about a lot. Today, we will explain the knowledge about the use and operation of large centrifugal fans. The main contents of this period are as follows: (1) After the large centrifugal fans are qualified for commissioning, they should be coated with insulation layer on the surface of the fan casing and use i环氧地坪nsulation materials in order to reduce the heat transfer from the casing to the outside. Sow, protect the safety of bearings. Moreover, the thickness of the insulation layer should be wel彩色沥清地坪l controlled, and it should be easy to repair and disassemble.
(2)、軸承的供油情況、振動情況以及軸承的溫度,應經常進行檢查,以便能夠讓風機能夠正常運轉。
(2) The oil supply, vibration and temperature of the bearing should be checked regularly so that the fan can operate normally.
(3)、大型離心風機剛剛開始工作時,軸承部位的振動是很小的,但是隨著使用時間的增加,其振動會逐步增大。一旦達到風機的最大極限時,就要停機進行修理瞭,否則再繼續使用的話,就會出現問題,發生危險,對風機造成損壞。
(3) When a large centrifugal fan is just starting to work, the vibration of bearing parts is very small, but with the increase of service time, its vibration will gradually increase. Once the maximum limit of the fan is reached, it is necessary to shut down and repair it. Otherwise, if it continues to be used, there will be problems, dangers and damage to the fan.
辛苦整理!轉載請註明來自http://www.wxmlfj.com/faq/2099.html