高溫老化房的老化原理有哪些？

高溫老化房的老化原理：高溫老化房是實行高溫功率應力試驗的一種設備，通過高溫老化房試驗來加速產品存在的缺陷的提早暴露。也就是給電子產品施加熱的、電的、機械的或多種綜合的外部應力，模擬嚴酷工作环境，消除加工應力和殘餘溶劑等物質，使潛伏故障提前出現，盡快使產品通過無效浴盆特性初期階段，進入恒定期。The aging principle of high temperature aging room: high temperature aging room is a kind of equipment to carry out high temperature power stress test, through high temperature aging room test to accelerate the early exposure of product defects. That is to say, applying thermal, electrical, mechanical or a variety of comprehensive external stresses to electronic products, simulating harsh working environment, eliminating processing stress and residual solvents and other substances, so that laten印花地坪t faults occur ahead of time, so that products can enter a constant period through the initial stage of invalid bathtub characteristics as soon as possible. 高溫老化房老化後實行電氣參數測量，篩選剔除無效或變值的元器件，盡可能把產品的早期無透水地坪效消滅在正常使用之前。這種為提高電子產品可靠度和延長產品使用使用周期，對恒定性實行必要的考核，以便剔除那些有“ 早逝 ” 缺陷的潛在 “ 個體 ” （元器件），確保整機優秀品質和期望使用周期的工藝就是高溫老化房的原理。After aging in high temperature aging room, electrical parameters are measured, invalid or variable components are screened out, and early invalidity of products is eliminated as far as possible before normal use. In order to improve the reliability of electronic products and prolong the service life of products, it is necessary to check the invariability so as to eliminate the potential "individuals" (components) with "premature death" defects and ensure the excellent quality of the whole machine and the expected service life of the process is the principle of high temperature aging room.
高溫老化房內溫度升高所需的熱量 加熱器提供，加熱器采用不銹鋼鎧裝結構，加熱器之間采用銅排連接，固定牢，外面用鍍鋅鐵網實行防護。The heat heater needed for temperature rise in high temperature aging room is provided. The heater is made of stainless steel armoured structure. Copper bars are used to connect the heaters, which are fixed firmly, and galvanized iron mesh is used to protect the outside.
辛苦整理！轉載請註明來自 http://www.chinasavant.cn/show.asp?id=145