廠傢介紹老化房的維護保養小竅門

老化房是航空、汽車、傢電、科研等領域必備的測試設備，老化房用於測試和確定電工、電子及其他產品及材料進行高溫的溫度环境變化後的參數及性能，老化房適用於對大型零部件，整機進行氣候模擬試驗。一臺這麼大型的老化房試驗設備，想要每次試驗都可以標準完美就必須定期檢查和維護，使設備保持在最佳的工作狀態，下面是由我司列出的維護保養小竅門，希望可以幫助到大傢。Aging room is a necessary test equipment in aviation, automobile, household appliances, scientific research and other fields. Aging room is used to test and determine the parameters and performance of electrical, electronic and other products and materials after high temperature environment changes. Aging room is suitable for climate simulation test of large parts and whole machine. A test equipment of such a large aging room, if you want every test to be perfect, you must check and maintain it regularly to keep it in the best working condition. Here are the maintenance tips listed by our company. Hope to help you.一、應建立老化房使用檔案，以方便老化房的維護維修。使用檔案應記錄老化房每次運行起止時間(日期)、試驗的種類、环境溫度，當系統發生故障時，應對故障現象作盡可能詳細的描述，對系統進行維護、維修的內容也應盡可能詳細地記錄。這是維護老化房及其設備最重要的一個竅門。First, the use files of aging rooms should be established to facilitate the maintenance and repair of aging rooms. The use of archives should record the starting and ending time (date), type of test and environmental temperature of each operation of the aging room. When the system fails, the failure phenomena should be described as detailed as possible, and the contents of maintenance and maintenance of the system should also be recorded as detailed as possible. This is the most important trick to maintain the aging room and its equipment.二、老化房必須由專人操作維護。嚴格遵守系統操作規程，避免他人違章操作系統。2. The aging room must be operated and maintained by special personnel. Strictly abide by the operating rules of the system to avoid other people violating the operating system.三、每月定期進行一次主電源開關(漏電短路器)動作試驗，以確保此開關在滿足負載能力下作為漏電保護器之用。具體步驟為，首先請確認總電源開關打到“ON"，即系統通電，然後請按試驗按鈕。若漏電斷路，器的開關桿落下來則此功能正常。3. The operation test o透水地坪f the main power switch (leakage short circuit) is carried out regula彩色沥清地坪rly every month to ensure that the switch can be used as leakage protector when the load capacity is satisfied. The specific steps are: first, make sure that the main power switch is on, that is, the system is energized, and then press the test button. If the leakage current breaks, the switch rod of the device falls down, the function is normal.四、在步入式老化房內放置的試驗產品離空氣調節通道的吸、排風口應有一定的距離，以免妨礙空氣的流量。4. The test products placed in the step-in aging room should be at a certain distance from the suction and exhaust outlets of the air-conditioning passage, so as not to hinder the air flow.
辛苦整理！轉載請註明來自 http://www.chinasavant.cn/show.asp?id=137