客戶對燃氣熱風爐選型要註意什麼

文章时间:2018-12-12 00:51:09   浏览次数:1190

不管是集體供暖還是提供生活熱水、洗浴等,都需要用到熱風爐,燃氣熱風爐是常用的類型。不過不同的需求在選型的時候要考慮方方面面,下面就具體來看下燃氣熱風爐選型時要註意什麼吧。熱風爐選型時當然要保證足夠的功率,這樣才能夠滿足最最基本的需求,所以熱風爐功率一定不能夠小於所需求的最大負荷。
Whether collective heating or providing domestic hot water, bathing, etc., all need to use hot stove, gas hot stove is a commonly used type. However, different needs should be considered in all aspects when selecting the type. Here is a specific look at what should be paid attention to when selecting the type of gas hot blast stove. Of course, enough power should be guaranteed in the selection of hot blast stoves, so as to meet the most basic needs, so the power of hot blast stoves must not be less than the required maximum load. 生活熱水用量
Hot water consumption for domestic use
熱風爐除瞭用於采暖之外,很大一部分都會用於生活熱水,特別是洗浴等,在選擇熱風爐的時候,需要加上這部分負荷,不過熱風爐提供的功率可以小於生活熱水的負荷,可以通過提前儲存生活熱水來滿足用量。
In addition to heating, a large part of the hot stove will be used for domestic hot water, especially for bathing. When choosing the hot stove, this part of 印花地坪the load should be added. However, the power provided by the hot stove can be less than the load of domestic hot water, which can be met by storing domestic hot water in advance.
熱風爐選型除瞭功率輸出要達標之外,還有一些熱風爐的循环系統也是熱風爐選型時需要特別註意的,比如循环泵的選型和水箱容量的選型。
In addition to the power output, some circulating systems of hot stoves need special attention in the selection of hot stoves, such as the selection of circulating pumps and the selection of water tank capacity.
循环泵選型
Selection of Circulating Pump
熱風爐把水加熱後會通過換熱器調節到用戶所需溫度,在通過用戶傢中後,管道中的水溫會降低,會再次回到熱風爐中進行加熱,這樣的循环系統需要一個動力來維持,這就是循环泵,循环泵一定要和水流量相當,並且要安裝備用循环泵,以備不時之需。
The 环氧地坪hot blast stove will adjust the water to the user's temperature through heat exchanger after heating. After passing through the user's home, the water temperature in the pipeline will decrease and return to the hot blast stove for heating again. Such a circulating system needs a power to maintain. This is the circulating pump. The circulating pump must be equal to the water flow, and the backup circulating pump should be installed to meet the occasional need.
水箱的選型
Type Selection of Water Tank
熱風爐在運行時,會產生一定的水蒸氣,這就會增大系統的壓力,這部分系統壓力可以用作傳輸動力,過大的壓力需要流到膨脹水箱,以維持系統恒定的壓力,因此水箱要選擇和整個系統吻合的。
Hot blast stove in operation, will produce a certain amount of water vapor, which will increase the pressure of the system, this part of the system pressure can be used as a transmission power, excessive pressure needs to flow to the expansion tank to maintain the constant pressure of the system, so the water tank should be chosen to match the whole system.