廠傢介紹熱風爐除垢劑的清潔原理

熱風爐經過長時間運行，不可避免的出現瞭水垢、銹蝕問題，熱風爐形成水垢的主要原因是給水中帶有硬度成份，經過高溫、高壓的不斷蒸發濃縮以後，在爐內發生一系列的物理、化學反應，最終在受熱面上形成堅硬、致密的水垢。水垢是熱風爐的“百害之首”，是引起熱風爐事故的主要原因，所以我們在日常生活中需要定期清理熱風爐，這時候就需要用到熱風爐除垢劑。
After a long period of operation, scaling and rusting inevitably occur. The main reason for scaling in hot blast stove is that there is hardness in feed water. After continuous evaporation and concentration at high temperature and pressure, a series of physical and chemical reactions occur in the furnace, and finally a hard and compact surface is formed on the heating surface. Scale. Scale is the most harmful factor of hot blast stove and the main cause of hot blast stove accident. So we need to clean hot blast stove regularly in our daily life. At this time, we need to use hot blast stove scale remover.
熱風爐除垢劑可以去除循环水以及熱風爐爐內水長期運行產生的水垢。例如：硫酸鈣垢、碳酸鈣垢、氧化鐵垢、硫酸鎂垢、矽酸鈣垢、碳酸鹽垢、氫氧化鈣垢、硫酸鋇垢、比較頑固的矽酸鹽垢等水垢。它的主要成分是由機高分子化合物，緩蝕劑，滲透劑，表面活性劑，促進劑，磷酸三鈉等化學元素組成，是一種弱酸性清洗藥劑。對於熱風爐設備內的碳鋼、紫銅、黃銅、不銹鋼、熱風爐鋼等配件均無腐蝕。熱風爐除垢劑分為固體和液體兩種。 固體為白色粉末狀，需60水溫溶解後，然後再清洗；液體為無色或琥珀色液體，常溫即可清洗。熱風爐除垢劑用量的標準是液體熱風爐除垢劑每噸（方）水加1030公斤，具體數據根據熱風爐容積和設備內壁垢的厚度和數量決定。
Scale remover for hot blast stove can remove circulating water and scale produced by long-term operation of water in hot blast stove. For example: calcium sulfate scale, calcium carbonate scale, iron oxide scale, magnesium sulfate scale, calcium silicate scale, carbonate scale, calcium hydroxide scale, barium sulfate scale, relatively stubborn silicate scale and other scales. Its main components are organic macromolecule compounds, 透水地坪corrosion inhibitors, penetrating agents, surfactants, accelerators, s彩色沥清地坪odium phosphate and other chemical elements. It is a weak acid cleaning agent. There is no corrosion for carbon steel, copper, brass, stainless steel, hot blast stove steel and other accessories in hot blast stove equipment. Hot blast stove scale remover is divided into solid and liquid two kinds. Solid is white powder, which needs 60 water temperature to dissolve before cleaning; liquid is colorless or amber liquid, which can be cleaned at room temperature. The standard of hot blast stove scale remover dosage is 1030 kg of water per ton (square) of liquid hot blast stove scale remover. The specific data are determined by the volume of hot blast stove and the thickness and quantity of scale on the inner wall of equipment.