熱風爐在運行過程中防爆的措施應做到位

由於熱風爐是針對加工或者是加熱原油的方式，並專門使用在礦物油行業中的一款熱風爐，而且熱風爐還能有效的進行原油的預熱，並可以使用在潤滑油所有生產的不同环節中，如果將其和傳統的熱風爐進行比較的話。熱風爐同時具備瞭受熱較為均勻，且操作更加便捷，以及節能和环保等多項優點，因此熱風爐在整個行業中都得到瞭廣泛的認可度，並在發展和應用上逐步的在市場上占據重要的位置，這些都是熱風爐比較優質的特點。
Because hot stove is aimed at processing or heating crude oil, and is spe环氧地坪cially used in the mineral oil industry, and hot stove can also effect印花地坪ively preheat crude oil, and can be used in all different links of lubricating oil production, if compared with traditional hot stove. Hot blast stove has the advantages of uniform heating, more convenient operation, energy saving and environmental protection, so hot blast stove has been widely recognized in the whole industry, and gradually occupies an important position in the market in the development and application, these are the characteristics of high quality hot blast stove. 實際上熱風爐屬於低壓的熱風爐，但是其內部整個導熱的液體在溫度上都比較高，且液體基本都屬於易燃和易爆的類型，所以當熱風爐在運行的過程中，如果出現導熱的液體發生外泄的話，那麼必定會引起爆炸現象，所以危險度是非常高的。
In fact, the hot blast stove belongs to the low pressure hot blast stove, but the temperature of the whole heat conducting liquid inside it is relatively high, and the liquid basically belongs to the flammable and explosive type, so when the hot blast stove is in operation, if there is leakage of the heat conducting liquid, it will cause explosion, so it is dangerous. The degree is very high.
因此熱風爐在運行的安全上需要引起大傢的註意，因為其在高溫上可以達到320℃；而低電壓也可以保證在0.3MPa-0.5MPa之間，這也是熱風爐區別於其他加熱油爐的最大優點，加熱的溫度可以非常精確的進行控制，並將傳統的蒸汽熱風爐直接代替。
Therefore, we need to pay attention to the safety of hot stove operation, because it can reach 320 C at high temperature, and low voltage can also be guaranteed between 0.3MPa and 0.5MPa, which is also the greatest advantage of hot stove which is different from other oil heaters. The heating temperature can be controlled very accurately, and the traditional steam heat can be controlled. The stove is directly replaced.
而且熱風爐在結構上較為緊湊，且屬於體積較小的機構，將控制以及輔助的設備基本都安裝於機箱山，所以比較適合中型或者是大型的廠傢使用，但是也可以事先對其進行組裝，主要還是根據客戶的要求來決定。
Moreover, the hot blast stove is compact in structure, and belongs to a smaller body. The control and auxiliary equipment are basically installed in the chassis hill, so it is more suitable for medium-sized or large-scale manufacturers to use, but it can also be assembled beforehand, mainly according to the requirements of customers.
雖然熱風爐具備的優點比較明顯，但是如果我們在操作和使用的過程中，不註意很多細節方面的問題，那麼操作起來也是非常危險的，所以不管是煉油廠，或者是企業行業在選用熱風爐的時候，都應該將安全方面的問題放在首位。
Although the advantages of hot blast stoves are obvious, if we do not pay attention to many details in the process of operation and use, it is also very dangerous to operate, so whether it is oil refineries or the enterprise industry when choosing hot blast stoves, safety issues should be put first. Position.