廠傢為大傢介紹一下熱風爐維修與保養

熱風爐外型均為長方體,任務室由優質碳膠囊充填機化矽耐火資料制成,爐殼采用優質冷軋鋼板經小型顆粒機折邊焊接制成,爐膛與爐殼之間用優質保溫資料作保溫層.馬弗爐普遍適用於各類實驗室、工礦企業、科研單位,為瞭增加爐口成都收賬熱量流失,進步熱風爐爐膛內溫度成都找人公司平均性,在熱風爐爐門內側裝有優質耐火資料制成成都收賬擋熱板.
The outer shape of the hot air furnace is all rectangular, the task room is made of high quality carbon capsule filling machine silicon refractory material, the furnace shell is made of high quality cold rolled steel plate through the small particle machine, and the furnace and furnace shell are used as insulation layer with high quality insulation material. The muffle furnace is generally applicable to various laboratory, industrial and mining enterprises and scientific research units. The heat loss at the orifice improves the average temperature in the hearth of the hot blast stove. A heat shield made of high quality refractory materials is installed inside the door of the hot blast stove.
熱風爐在改動接法時不用裝配矽碳棒,隻需改動接法,而且改動接法後,運用馬弗爐時要留意遲緩調理加熱功率調理鈕,加熱電流值不得超越額外值.
The hot air furnace does not have to assemble silicon carbon stick when changing the connection method. It only needs to change the connection method. And after changing the connection method, we should pay attention to the slow conditioning heating power conditioning button when using the 印花地坪muffle furnace. The value of heating current should not exceed the extra value.
假如夾頭有嚴重氧化時應換新收賬.矽碳棒兩端裝置孔處成都找人公司隙縫使用石棉繩梗塞.電阻爐爐溫不得超越最高任務溫度1350℃.矽碳V型混合機棒在最低溫度下允許陸續任務4小時.在熱風爐運用十分長時刻後,如發順時針方向調理加熱功率調理鈕至最大地位,加熱電流仍上不去.間隔小型貼標機額外值較遠,達不到所需的加熱功率,解釋矽碳棒已老化.
If the chuck has serious oxidation, it should be changed. The slotting at the hole at both ends of the silicon carbon stick uses asbestos rope infarction. The furnace temperature of the resistance furnace shall not exceed the maximum task temperature of 1350. The silicon carbon V mixer rod is allowed to work for 4 hours at the lowest temperature. After a very long time in the hot blast furnace, the heating power adjustment is adjusted in clockwise direction. When the knob reaches its maximum position, the heating current will not go up. The extra value of the small labeling machine at intervals is far from the required heating power, which explains the aging of the silicon carbon rod.
矽碳棒型爐子,發現矽碳棒損壞後,應改換規格相反而且電阻值相近的新矽碳棒.改換時先卸下兩端維護罩與矽碳棒夾頭,接著取出已損壞的矽碳棒,由於矽碳棒易斷,裝置時須小心,兩端露爐殼內部分應相等,夾頭必需緊固,使之與矽碳棒接觸良好.
Silicon carbon rod type furnac透水地坪e, when it is found that silicon carbon rod is damaged, should be replaced with a new silicon carbide rod with opposite and similar resistance values. First, remove the end maintenance cover and the silicon carbon stick, then remove the damaged silicon carbon stick, because the silicon carbon rod is broken easily, the device must be careful, the inner part of the exposed furnace shell should be equal, and the chuck must be fastened to silicon carbon. The rod is in good contact.