廠傢談談生物質熱風爐對烘房的要求包括？

生物質熱風爐對烘房成都收賬要求如下：1）熱風爐房應盡可能接近用熱設備，目成都找人公司在於縮短輸送管路，降低基本建設費用，減少管路散熱損失。2）燃料和灰渣成都收賬存放運輸方便。3）熱風爐在安裝運輸時通暢．4）熱風爐房收賬佈置應符合國傢勞動總局及消防部門成都找人公司有關規定．熱風爐房內光線充足，通風良好，地面不應積水，為保證運行操作和檢修方便，爐前空餘從料鬥邊緣開始2.5－4米，爐後空餘1.3－2.5米，熱風出口一側空餘（包括螺旋出渣器伸出部分在內）3－3.5米，另一側空餘（包括鼓風機在內）1.5－2米，爐型大時，空餘也宜大些。
The requirements of biomass hot-blast stove for drying room are as follows: 1) Hot-blast stove room should be as close as possible to heat equipment, in order to shorten the pipeline, reduce the cost of capital construction and reduce the heat loss of pipeline. 2) the storage and transportation of fuel and ash are convenient. 3) Hot-blast stove should be installed and transported smoothly. 4) The layout of hot-blast stove house should conform to the relevant regulations of the State Administration of Labor and Fire Protection Department. The light inside the hot-bl环氧地坪ast stove room is abundant, the ventilation is good, and the ground should not accumulate water. In order to ensure the operation and maintenance convenience, the spare space before the stove begins 2.5-4 meters from the edge of the hopper and after the stove is 1.3-2.5 meters. Mi, on one side of the hot air outlet (including the extension part of the screw slag extractor) 3-3.5 meters, and on the other side (including the blower) 1.5-2 meters. When the furnace is lar透水地坪ge, the surplus should also be larger.