基材處理新建的环氧地坪漆施工方法

一個質量好的环氧地坪漆也是與產品的使用壽命直接相關的，因此在施工方面，大傢也需要註意，同時還有平時的保養，隻有兩者相結合才能夠更好的做到环氧地坪漆的使用壽命延長。基材處理方法對於新建环氧地坪漆基材，采用如一處理方法：
A good quality epoxy floor paint is also directly related to the service life of the product, so in the construction, we also need to pay attention to the usual maintenance, only the combination of the two can 彩色沥清地坪better extend the service life of epoxy floor paint. Substrate treatment method for new epoxy floor paint substrate, such as a processing method: （1）處理上的：進步地面整體平整度，去除浮層及污物，獲得均一的粗拙表面以利於塗層附著
(1) Treatment: Improve the overall smoothness of the ground, remove floating layer and dirt, and obtain uniform rough surface to facilitate coating adhesion.
（2）處理設備：自吸塵地面磨削機、真空吸塵器等。
(2) processing equipment: self suction ground grinding machine, vacuum cleaner and so on.
（3）要求：達到地面堅實，無砂眼，窩洞。同時要求幹燥，清潔，無浮塵，油污，水泥砂粒等雜物。
(3) requirements: to achieve solid ground, no sand holes, holes. At the same time, it requires dry, clean, no floating dust, oil dirt, cement sand and other debris.
（4）工序：采用地面磨削機整體打磨一遍---吸盡灰塵----修補大的窩洞，凹陷及裂痕。對於舊环氧地坪漆，如舊漆層附著不牢，需采用地面銑刨機整體去除舊漆層（1mm厚度以下舊漆層可采用金剛削刀處理），因處理本錢高，如客戶一要求不整體去除漆層，則隻去除松動舊塗層，去除表面油污及雜物。
(4) Procedure: Use the ground grinding machine to grind the whole once - - absorb the dust - - repair large holes, depressions and cracks. For old floor coatings, if the old coatings are not firmly adhered to, it is necessary to use a ground milling machine to remove the old coatings as a whole (the old coatings below 1 mm thickness can be treated with diamond cutters). Because of the high cos印花地坪t of treatment, if customers do not require the whole removal of the coatings, only loose old coatings will be removed, and surface oil and sundries will be removed.