环氧地坪防止地面刷痕、起殼、脫層的方法

环氧地坪表面刷痕產生的原因：A、环氧地坪施工原因：施工方法錯誤，塗料攪拌後施工時間過長，滾刷均勻，塗層薄厚控制不到位。B、工具原环氧地坪因：滾筒質量不合格，滾筒表面處理有誤。C、塗料本身的原因：主要是塗料的流平性差，塗料的粘度過高。有觸變性的填料或助劑。
Reasons for surface brush marks on epoxy flooring: A. Construction reasons of epoxy flooring: incorrect construction method, long construction time after mixing paint, even rolling brush, poor control of coating thickness. B, tool reason: drum quality is not qualified, roller surface treatment is wrong. C, paint itself: mainly due to poor levelling of paint and excessive viscosity of coatings. Thixotropic filler or auxiliaries. 环氧地坪表面刷痕解決的方法：A、註意施工方法，塗料的熟化時間不要過長。滾筒的二端到圓角，塗層的一遍厚度盡可能不要小於0.15mm。B、買好一點的滾筒，滾筒使用前用膠帶處理一下滾筒表面C、塗料的原因，增加塗料的流平性，降低塗料的粘度，盡可能減少有觸變性的填料和助劑，特別要註意墻面塗料的流平劑用在环氧地坪塗料的現象。
Solutions to brush marks 印花地坪on the surface of epoxy floor: A. Pay attention to the construction method, and the maturation time of the paint should not be too long. The two ends of the drum to the fillet, the thickness of the coating should not be less than 0.15mm as much as possible. B. Buy a better drum and use tape to deal with the causes of C and paint on the surface of drum before use. Increase the levelness of paint, reduce the viscosity of paint, and minimize thixotropic fillers and additives. Particular attention should be paid to the phenomenon that leveling agent of wall paint is used in floor paint.
防止环氧地坪起殼脫層的方法