防靜電环氧地坪漆施工過程中漆膜厚度控制的方

在防靜電环氧地坪漆施工質量管理中，膜厚管理是較為主要的一項。所謂膜厚管理，是對防靜電环氧地坪漆施工中的塗膜厚度進行操控和對施工後的膜厚進行查看分析、判別和質量反應與處理的進程。膜厚辦理的意圖是使环氧地坪塗層的厚度既要滿足規劃規則的厚度以保證防護性能，又要防止超厚帶來的糟蹋。
In the construction quality management of anti-static epoxy floor paint, film thickness management is a major one. The so-called film thickness management is the process of controlling the film thickness in the construction of Antistatic Epoxy Floor paint and checking and analyzing the film thickness after construction, distinguishing and quality reaction and treatment. The purpose of film thickness management is to ensure that the thickness of epoxy floor coating not only meets the thickness of planning rules to ensure protection performance, but also to prevent the waste caused by excessive thickness. 防靜電环氧地坪塗裝關於膜厚辦理各個項均有清晰的請求，例如在塗裝技術規劃上，對每道應到達的厚膜和總幹膜厚度都有嚴厲的規則，應按請求履行。
Anti-static epoxy floor coating has clear requests for film thickness management. For example, in the coating tec环氧地坪hnology planning, there are strict rules for the thickness of thick film and dry film to be reached, which should be fulfilled as requested.
膜厚辦理包含濕膜厚度查看和幹膜厚度查看。濕膜厚度通常在环氧地坪工程塗裝進程中，在每一道塗料塗刷完結時進行及時查看。幹膜厚度可在施工進程中查看，但在施工結束後有必要進行總幹膜厚度的查驗。
Film thickness management includes wet film thickness check and dry film thickness check. Wet film thickness is usually checked in time at the end of each paint brushing in the process of epoxy flooring Engineering painting. Dry film thickness can be checked in the construction process, but it is necessary to check the total dry film thickness after the completion of construction.
1、濕膜厚度的查驗
1. Check the wet film thickness.
濕膜厚度測定通常是塗覆者用於輔導施工人員斷定取得預期幹膜厚度需要塗覆的規則防靜電环氧地坪材料用量。濕膜測厚儀常用的有兩種：濕膜厚度輪規和濕膜厚度梳規。選用濕膜厚度測厚儀的長處在於能夠在塗覆進程中查看和改正不適當的塗膜厚度。如果施工人員知道瞭濕膜厚度，當以此數據乘以塗料固體分的體積百分率，就可估算出幹膜的厚度。
Wet film thickness measurement is usually used by the coater to instruct the builder to determine the amount of Antistatic Epoxy Flooring materials required to achieve the desired dry film thickness. There are two kinds of wet film thickness gauge: wet film thickness gauge and wet film thickness comb gauge. The advantage of choosing a wet film thickness gauge is that it can inspect and correct inappropriate film thickness in the process of coating. If the builder knows the thickness of the wet film, the thickness of the dry film can be estimated by multiplying this data by the volume percentage of the solid component of the paint.
實踐中進行破壞性實驗後較難修正，所以濕膜厚度的測定和每道塗裝厚度的累加以及塗料用量的操控通常可用於替代總幹膜厚度測定。
It is difficult to correct after destructive experiments in p透水地坪ractice, so the determination of wet film thickness and the accumulation of each coating thickness and the control of coating dosage can usually be used to replace the measurement of total dry film thickness.
2、幹膜厚度的查看
2. Dry film thickness check.
測定幹膜厚度的主要性在於保證塗覆到達規則的厚度，防止由於不適當的厚度致使塗層的過早失效，關於环氧地坪塗裝特別如此。幹膜厚度的測量有必要在塗膜徹底枯燥後，選用幹膜測厚儀進行測定。
The main purpose of measuring dry film thickness is to ensure the thickness of coating arrival rules and prevent premature failure of coating due to inappropriate thickness, especially for floor coating. It is necessary to use dry film thickness gauge to measure dry film thickness.
常用於环氧地坪的幹膜厚度查看儀器有破壞性測厚儀和卡尺。許多塗層膜厚超越規則規范，通常都不成問題，但帶來瞭防靜電环氧环氧地坪塗料的過多損耗和塗裝經費的添加。由於塗層過厚會影響溶劑的蒸發和徹底幹燥，以及下一塗層的固化，過厚的塗膜還也許發生起皺或龜裂等缺陷，應該註意一下。施工中當膜厚超越規則最大幹膜厚度的10%時，應設法處理。
Commonly used in the dry film thickness of epoxy floor, the instrument has destructive thickness gauge and caliper. Many coatings exceed the rules and specifications, which are usually not a problem, but bring excessive loss of anti-static epoxy floor coatings and the addition of painting funds. Due to the influence of coating thickness on evaporation and thorough drying of solvents and curing of the next coating, wrinkling or cracking may occur in the overly thick coating. It should be noted that. During construction, when the thickness of the membrane exceeds 10% of the maximum dry film thickness, we should try to deal with it.