廠傢揭示翅片管生產技術現狀？【總結篇】

1、套裝翅片管：套裝翅片管工藝是預先用沖床加工出一批單個的翅片管，然後用人工或機械方法，按一定的距高(翅距)，靠過盈將翅片套裝在管子外表面上。它是應用最早的一種加工翅片管的方法。1. Set finned tube: Set finned tube technology is to pre-process a batch of single finned tube with punch, and then use manual or mechanical methods, according to a certain distance (fin pitch), by interference will be set on the outside surface of the tube. It is the earliest method of finned tube processing.2、鑲嵌式螺旋翅片：鑲嵌式螺旋翅片管是在鋼管上預先加工出一定寬度和深度的螺旋槽，然後在車床上把鋼帶鑲嵌在鋼管上。在纏繞過程中，由於有一定的預緊力，鋼帶會緊緊地勒在螺旋槽內，從而保證瞭鋼帶和鋼管之間有一定的接觸面積。2. Mosaic spiral fin: The mosaic spiral fin tube is a spiral groove with a certain width an环氧地坪d depth pre-processed on the steel pipe, and then the steel strip is embedded on the steel pipe on the lathe. In the winding process, due to a certain pre-tightening force, the steel strip will be tightly tied to the spiral groove, thus ensuring a certain contact area between the steel strip and the steel pipe. 3、釬焊螺旋翅片管：釬焊螺旋翅片管的加工分兩步進行。首先，將鋼帶平面垂直於管子軸線按螺旋線方式纏繞在管子外表面上，並把鋼帶兩端焊在鋼管上固定，然後為消除鋼帶和鋼管接觸處的間隙，用釬焊的方法將鋼帶和鋼管焊在一起。3, brazing spiral fin tube: brazed spiral fin tube processing in two steps. Firstly, the steel strip is spirally wound on the outside surface of the pipe perpendicular to the axis of the pipe, and the two ends of the steel strip are welded on the steel pipe. Then, in order to eliminate the gap between the steel strip and the steel pipe, the steel strip and the st彩色沥清地坪eel pipe are welded together by brazing.4、高頻焊螺旋翅片：高頻高頻焊螺旋翅片管是目前應用最為廣泛的螺旋翅片管之一，現廣泛應用於電力、冶金、水泥行業的餘熱回收以及石油化工等行業。4. High-frequency welding spiral fin: High-frequency welding spiral fin tube is one of the most widely used spiral fin tubes at present. It is widely used in power, metallurgy, cement industry, waste heat recovery and petrochemical industry.辛苦整理.轉載請註明http://www.wxsxsjx.com