工業环氧地坪工程施工如何預防出現裂縫現象

工業环氧地坪工程施工比較容易，是一種主要采用瞭兩次鏝塗自流平工藝，平整度大大提高。目前這種產品主要以優質的產品質量，精美的表面設計等贏得瞭眾多客戶的贊賞，是目前环氧地坪施工中的領頭人，那麼我們在平時的生活中如何避免其產品出現裂縫現象，首先：
The construction of industrial epoxy flooring project is relatively easy. It is a kind of self-leveling process which mainly adopts two upsetting coatings, and the smoothness is greatly improved. At present, this product has won the praise of many customers mainly for its high quality product quality and exquisite surface design. It is the leader in the construction of epoxy flooring. So how can we avoid cracks in our daily life? First of all: 1、施工過程把控：
1. The construction process controls:
工業环氧地坪工程施工過程中，首先在材料拌合要選擇攪拌機，CV值控制在0.15以內。並且在施工完後保證有2次抹平，這樣可以減少裂縫的出現幾率。
In the process of construction of industrial epoxy flooring project, first of all, mixer should be selected for material mixing, and CV value should be controlled within 0.15. And after the completion of construction to ensure that there are彩色沥清地坪 2 times to smooth, which can reduce the probability of cracks.
2、混凝土材料質量：
2. The quality of concrete materials:
混凝土主要由水泥、骨料、水、沙石組成，要預防裂縫我們首先要從控制材料開始，水泥我們要盡量選擇發熱量較低的材料，砂石盡量選用2.4-3.0細度的中砂。
Concrete is mainly composed of cement, aggregate, water and sand. To prevent cracks, we should start with controlling materials. Cement should choose materials with lower calorific value as far as possible, and sand with 2.4-3.0 fineness as possible.
3、基面施工氣候：
3. The construction climate of ba环氧地坪se surface:
混凝土地面出現裂縫，除瞭材料配比之外，還個主要因素就是氣候。因為混凝土地面材料導熱性較差，如果溫度驟降，會導致表層溫度低，內部溫度高，導致混凝土因為溫差出現裂縫。
In addition to the material ratio, the main factor is the climate. Because the thermal conductivity of concrete surface materials is poor, if the temperature drops sharply, it will lead to low surface temperature and high internal temperature, which will lead to cracks in concrete due to temperature difference.
工業环氧地坪工程基面主要有混凝土地面、砂漿地面、金剛砂耐磨地平面、水磨石地面等，這些地面如果出現裂縫，即便通過砂漿中塗進行修補，裂縫依舊會在日後慢慢擴展延伸，加寬加長，並且會直接作用於工業环氧地坪工程塗料層，導致工業环氧地坪工程出現裂縫。
Industrial epoxy floor engineering base surface mainly includes concrete floor, mortar floor, diamond wear-resistant floor, terrazzo floor and so on. If these ground surface cracks occur, even if repaired through mortar coating, the cracks will continue to expand and extend slowly in the future, widen and lengthen, and will directly affect the industrial floor engineering coating. The material layer leads to cracks in the industrial floor project.