兩個因素決定环氧地坪施工質量

第一個方面：环氧地坪漆品種選購。都是根據不同的施工环境相應設置而成的，具有很強的針對性，如：防滑，耐磨等。环氧地坪漆色彩豐富，鮮亮飽滿，不易變色。也可以考慮選購帶有這種特性的环氧地坪漆。沒有不想施工簡便的工程，普通水泥环氧地坪進行數次塗抹，施工完畢後數天內即可通行使用。在水泥地面的基礎上，使用环氧地坪材料可以增強水泥地面的附著性，耐磨性，令地面更加堅固，效果也更好。耐化學品性需要良好，在使用過程中會接觸的化學介質種類、濃度及接觸時間。基材狀況決定平整度外觀、地坪塗層越厚，平整度越好。依據施工环境及要求選用相應的地坪漆種，如：停車場施工，要選購帶有防滑性能的环氧地坪漆。對潔凈有要求的場所，一般選用自流平地坪，該漆厚度能保證施工質量。环氧地坪在使用過程要經受車輛行走，要考慮其沖擊性能，遭受何種程度磨損。
The first aspect is the selection of epoxy floor paint varieties. They are all set up according to different construction environments and have strong pertinence, such as anti-skid, wear resistance and so on. Epoxy floor paint is rich in color, bright and full, not easy to change color. You can also consider the purchase of epoxy floor paint with this characteristic. There is no project that does not want to be constructed simply. The ordinary cement floor is smeared several times and can be used within a few days after the completion of the construction. On the basis of cement ground, the use of floor materials can enhance the adhesion and wear resistance of cement ground, make the ground more solid and have better effect. Good chemical resistance is required. The type, concentration and contact time of the chemical medium will be contacted during the use. The condition of the substrate determines the appearance of the evenness, the thicker the floor coating is, the better the flatness is. According to the construction environment and requirements, choose the appropriate floor paint, such as: parking lot construction, choose epoxy floor pain透水地坪t with anti-skid performance. Generally, the self leveling floor is selected for the sites with clean requirements, and the thickness of the paint can ensure the quality of the construction. The epoxy flooring is subject to vehicle running in the use process, and its impact performance and the degree of wear and tear should be considered.
第二個方面：施工經驗。环氧地坪漆在建築行業的施工，少不瞭混泥土和舊地面這兩大因素的應用。若處理不當，將影響施工的進展和效果。因此地坪漆施工前，必須要做兩件事情:施工前要檢查已經使用過的舊地面，有無破損，有的話要及時修補。去除蠟層、油類污染、化學腐蝕介質和舊塗層。混凝土主要是由水泥、砂、石、灰泥等組成的，吸水率大、堿性強、幹燥慢。新澆註混凝土的表面泛堿物和吸水率是影響塗裝質量的關鍵，所以，在塗裝前要將表面泛堿物要徹底清除，必要時做中和處理，以便工程順利開展。
Second aspects: construction experience. The construction of epoxy floor paint in the construction industry is indispensable to the application of the two major factors, namely, the concrete and the old ground. Improper handling will aff环氧地坪ect the progress and effect of construction. Therefore, before the construction of floor paint, two things must be done: before the construction, we should check the old ground that has been used, whether there is damage or not, and if so, we should repair it in time. Remove wax layer, oil contamination, chemical corrosion medium and old coating. Concrete is mainly composed of cement, sand, stone, mortar and so on. It has high water absorption, strong alkalinity and slow drying. Surface pan-alkali and water absorption of newly poured concrete are the key factors affecting the quality of coating. Therefore, before coating, surface pan-alkali should be thoroughly removed and neutralized when necessary, so as to smooth the project.