廠傢介紹舊环氧地坪翻新施工步驟

舊环氧地坪破損會影響它對地面的保護作用，容易起灰、起砂。灰塵進入機械內又會造成機械的損壞，所以，這時候就需要對舊环氧地坪翻新處理。下面介紹环氧地坪翻新施工方案。1、清除舊环氧地坪。對於舊环氧地坪要先使用專業的环氧消磨設備將其完全清除，這個第一步都是統一的，然後再根據不同的环氧地坪類型進行施工。
The old epoxy floor damage will affect its protection to the ground, easy to start ash and sand. Dust into the machinery will cause damage to the machinery, so it is necessary to renovate the old floor at this time. The following is an introduction to the renovation plan for epoxy floor. 1. Remove the old epoxy floor. For the old epoxy flooring, professional epoxy grinding equipment should b彩色沥清地坪e used to remove it completely. This first step is unified, and then construction is carried out according to different types of epoxy flooring. 2、清除油垢。如果地面有油污，要先將其清楚，再根據實際情況進行脫脂、脫油，確定表面幹凈後方可施工。
2, remove grease stain. If there is oil pollution on the ground, it should be clear first, then degrease and degrease according to the actual situation, and make sure that the surface is clean before construction.
3、裂縫處理。材料和施工質量不好往往會造成地面裂縫產生，如果發現裂縫可以使用切割機把裂縫切成V形槽，然後灌入环氧砂漿使其平整即可。
3, crack treatment. Poor material and construction quality often lead to ground cracks. If cracks are found, a cutting machine can be used to cut the cracks into V-shaped grooves an印花地坪d then pour epoxy mortar into them to make them flat.
4、坑洞處理。地面坑洞會使地面難以找平，建議使用打磨機打磨，將地面有空鼓的地方鏟除，再用砂漿或是水泥進行坑洞處理。
4, pothole processing. Ground holes will make it difficult to leveling the ground. It is suggested to use a grinder to grind the hollow areas of the ground, and then use mortar or cement to treat the holes.