地下車庫地坪廠傢介紹环氧地坪施工方法

現在我們在進入地下車庫時會發現，地面非常的平凈，明亮，這主要是因為环氧地坪的效果。环氧地坪具有很多不同的種類，也具有很多優勢，被廣泛的應用於各大工廠車間，地下車庫等地方。雖然环氧地坪的整體效果很好，但是如果在施工期間不註意一些細節的話，也會影響到环氧地坪的效果。下面將為大傢講一下在基層素地處理完畢後的塗裝方法。
Now when we enter the underground garage, we will find that the ground is very smooth and bright, mainly because of the effect of epoxy floor. Epoxy floor has many different kinds and advantages, and is widely used in major factories, underground garages and other places. Although the overall effect of epoxy flooring is very good, if we do not pay attention to some details during the construction, it will also affect the effect of epoxy flooring. Next, we will talk about the painting methods after the prime treatment.
1、底漆塗裝：先將甲組分攪拌均勻，並按甲、乙組份比例配制：攪拌均勻後以刮片或滾筒施工。
1. Primer painting: first mix the component A evenly, and make it according to the proportion of component A and component B: mix evenly, then construct with scraper or drum.
2、中塗塗裝；在底漆幹後，可在刮二遍後中塗一遍，以填補环氧地坪的孔洞，完全幹燥後可再刮二遍中塗，以增加塗層厚度，提高抗壓能力。
2. Medium coating; after the primer is dry, it can be applied once after scraping twice to fill the hole in the floor. After completely drying, it can be scraped twice again to increase the thickness of the coating and improve the compressive capacity.
3、待中塗完全幹燥後，用磨平機、砂紙等打磨，將批塗產生的刀痕，不平整之處及顆粒打磨掉，並用吸塵器吸塵幹凈。
3. After the Mid-coating is completely dried, the knife marks, irregularities and particles produced by batch coating are polished by grinding machine and sandpaper, and cleaned by vacuum cleaner.
4、滾塗面漆：將面漆按比例調配好後，用滾塗方法將环氧地坪均勻滾塗一遍（也可用噴塗、刷塗），若有需要可滾塗第二遍面漆，方法相同。
4. Rolling finish: After the top paint is proportionally blended, the floor is evenly rolled once (sprayed o环氧地坪r brushed) by the rolling method. If necessary, the second coating can be rolled. The method is the same.
5、將保護劑攪拌均勻，以棉佈或棉拖把塗裝。要求均勻，無殘留。同時應註意不要有尖銳物體刮傷地面。
5. Mix the protective agent evenly and apply it to cotton or cotton mop. Uniform and no residue required. At the same time, care should be taken not to have sharp objects scratching the ground.
為瞭环氧地坪的效果，除瞭要註意塗裝方法外，還有註意一些其它的因素，如現場封閉不好及存在交叉施工時不宜施工，已防止顆粒劃傷等現象發生；材料印花地坪混合後應在30分鐘內使用完畢，塗裝間隔時間12～24小時。塗佈時發現砂粒或其他雜質，應立即清除；地面未幹時，嚴禁進入工地現場。
In order to improve the effect of epoxy flooring, besides painting methods, other factors should be paid attention to, such as poor site closure and inappropriate cross-construction, which have prevented the occurrence of particle scratches and other phenomena; materials should be used within 30 minutes after mixing, and the painting interval should be 12-24 hours. When sand or other impurities are found during coating, they should be removed immediately; when the ground is not dry, it is strictly forbidden to enter the site.