控制环氧耐磨地坪施工效果的要點解析

通過近幾年的發展，环氧地坪已經憑借著自身的優勢，贏得瞭眾多用戶的認可，被廣泛的應用於各個領域，未來 的發展前景也非常可觀。除之此外，环氧地坪也有很多種類，如环氧耐磨地坪，环氧防靜電地坪等，可以滿足各種用戶的需求。下面將針對於环氧地坪的施工效果的要點進行簡單講解。
Through the development in recent years, epoxy floor has won the recognition of many users by virtue of its own advantages, and has been widely used in various fields. The future development prospects are also very considerable. In addition, there are many kinds of epoxy flooring, such as epoxy wear-resistant flooring, epoxy anti-static flooring and so on, which can meet the needs of various users. Next, I will briefly explain the main points of the construction effect of epoxy floor.
雖然，我們無法否認环氧耐磨地坪的優點，但是想要達到很好的效果，施工也是非常重要的一個环節，那麼怎樣才能控制好环氧耐磨地坪的施工效果呢，主要從三個主面下手，一確保耐磨材料與水泥混凝土的良好粘結及整個环氧地坪的色彩均勻一致；二采取有效措施防止环氧地坪發生收縮裂縫；三嚴格控制地坪表面平整度。下面將針對於這個問題，簡單的講解。
Although, we can not deny the advantages of epoxy wear-resistant floor, but in order to achieve good results, construction is also a very important link, so how to control t彩色沥清地坪he construction effect of epoxy wear-resistant floor, mainly from three main aspects, to ensure good bonding between wear-resistant materials and cement concrete and the whole floor. The color of the floor is uniform, effective measures should be taken to prevent shrinkage cracks and the smoothness of the floor surface should be strictly controlled. The following is a simple explanation for this problem.
1、確保耐磨材料與水泥混凝土基層的良好粘結及地坪的色彩一致，主要是控制耐磨材料的撒佈時機及每平米的撒佈量，撒佈應選擇在混凝土初凝階段，每平米的撒佈量應通過兩次撒佈以達到撒佈均勻，撒佈量在6-8kg/m2。
1. To ensure the good bond between wear-resistant materials and cement concrete base and the color of the floor is consistent, mainly controlling the spreading time of wear-resistant materials and the spreading amount per square meter. Spreading should be selected at the initial setting stage of concrete, and the spreading amount per square meter should be spread twice to achieve uniform distribution, with the spreading amount being 6-8 kg/m2.
2、防止耐磨地坪產生收縮裂縫主要是控制兩個方面：一是撒佈耐磨材料前控制好混凝土表面的幹燥度，如混凝土表面有積水，須清理幹凈再進行撒佈，否則積水部位容易出現幹縮裂縫；二是及時切割伸縮縫，在水泥混凝土澆註2天後，即耐磨地坪完工1-2天後即進行切割，再晚將起不到作用。
2. Preventing shrinkage cracks on wear-resistant floors mainly includes two aspects: one is to control the dryness of concrete surface before spreading wear-resistant materials; if there is water on concrete surface, it must be cleaned up before spreading, otherwise dry shrinkage cracks will easily occur in the Water-accumulated parts; the other is to cut expansion joints in time and pour them into cement concrete; the other is to control the dryness of concrete surface before spreading wear-resistant materials. It will be cut after 1-2 days after completion of the wearable Floor.
3、地坪施工的平整度主要靠水泥混凝土基層的平整度來控制，耐磨材料僅是表面很薄的一道致密層，所以控制混凝土初凝前表面的平整度是關鍵工序。建議嚴格控制水泥混凝土澆註時的平整度，可采用一前一後兩次刮杠找平。另外，在兩條混凝土相鄰的施工縫處，由於靠近施工縫模板處，在地坪收光成型時抹光機不易打磨到，所以在施工縫處容易引起高差。
3. The smoothness of floor construction is mainly controlled by the smoothness of cement concrete base. Wear-resistant material is only a thin dense layer on the surface, so controlling the smoothness of the surface before the initial setting of concrete is the key process. It is suggested to strictly control the smoothness of cement concrete pouring, and it can be leveled one印花地坪 or two times after scraping. In addition, in the two adjacent construction joints of concrete, because near the construction joints template, the polishing machine is not easy to grind when the floor is formed, so it is easy to cause height difference at the construction joints.