總結环氧地坪的主要使用場所有哪些呢?客戶源

文章时间:2018-11-03 04:00:46   浏览次数:1108

环氧地坪的種類有很多,我們在使用环氧地坪的過程中需要對环氧地坪的相關知識和我們所應用的場合進行一定的認識和瞭解,從而為我們的施工和今後的使用帶來更多的幫助。环氧地坪按照功能分為:經濟型环氧樹脂(厚膜)地坪,环氧砂漿地坪,环氧自流平地坪,防靜電地坪,水性环氧(砂漿、自流平)地坪,高耐磨环氧壓砂地坪,环氧防滑地坪,环氧閃片地坪,藝術环氧彩砂地坪,藝術环氧彩片地坪,藝術环氧磨石地坪等。
There are many kinds of epoxy flooring, we need to have a certain understanding and understanding of the relevant knowledge of the flooring and the occasions we use in the process of using the flooring, so as to bring more hel透水地坪p to our construction and future use. Epoxy floors are classified according to their functions as follows: economical epoxy resin (thick film) floors, epoxy mortar floors, epoxy self-leveling floors, anti-static floors, water-borne epoxy (mortar, self-leveling) floors, high wear-resistant epoxy pressure sand floors, epoxy anti-skid floors, epoxy flash floors, art epoxy color sand floors, art epoxy color floors. Film floor, art epoxy grindstone floor, etc.
环氧地坪用途,环氧地坪從開始時用於功能性地坪:如防腐、耐磨、防滑,發展到通用的普通工業地坪;除瞭具有功能性的要求,還具有裝飾性的效果。在工業地坪獲得廣泛應用的基礎上,隨著人們生活水平的不斷提高,現已在傢庭裝潢中得以推廣應用。地坪漆已成為我國發展速度最快的產業之一,引起眾人的註意。它可象水泥制品那樣實現工廠化生產,前景更可觀! 適用於各種場地,如:廠房,機房,倉庫,實驗室,病房,手術室,車間等。环境溫度為25℃時,施工後2-3天應達到實幹,即硬度達到完成固化的80%左右;氣泡:平塗型、砂漿型無氣泡,自流平允許1個小氣泡/10平方米;流平性好,無鏝刀痕,大面積接口處基本平整;無粗雜質,但允許有空氣中的浮塵掉落在造成的極小缺陷。
Epoxy flooring uses, epoxy flooring from the beginning for functional flooring: such as anti-corrosion, wear-resistant, anti-skid, developed to general industrial flooring; in addition to functional requirements, but also has decorative effect. On the basis of extensive application of industrial floor, with the continuous improvement of people's living standards, it has been widely used in family decoration. Floor paint has become one of the fastest growing industries in China and has attracted public attention. It can achieve factory production like cement products, and the prospect is more substantial. Suitable for all kinds of venues, such as: workshop, machine room, warehouse, labor彩色沥清地坪atory, ward, operating room, workshop, etc. When the ambient temperature is 25 C, the hardness should reach about 80% of the solidification after 2-3 days of construction; bubbles: flat coating and mortar without bubbles, self-leveling allows a small bubbles/10 square meters; good leveling, no trowel marks, large area of interface is basically flat; no coarse impurities, but allows the floating dust in the air to fall off. The smallest defect is caused.