顏值再現！环氧地坪翻新流程有哪些？

時代發展，世間萬物也是在變化更新新過程中不斷發展的，人會老，樹會枯，更何況是我們日常使用的环氧地坪。环氧地坪因其優良的使用性能被廣泛用於各個行業，尤其是工廠，車庫等行業，因此使用幾年後，环氧地坪難免會出現各種問題，像裂紋，起泡，劃傷等等，一旦出現這個問題，那麼环氧地坪的顏值必然大打折扣，同時在一定程度上也會制約公司的發展，因此，讓环氧地坪顏值再現，就成瞭各個企業比較關心和關註的問題瞭。
With the development of the times, all things in the world are constantly developing in the process of change and renewal. People will grow old and trees will wither, let alone the epoxy floor that we use everyday. Because of its excellent performance, epoxy flooring is widely used in various industries, especially in factories, garages and other industries, so after several years of use, there will inevitably be a variety of problems, such as cracks, bubbles, scratches and so on. Once this problem occurs, the color value of epoxy flooring will be greatly reduced, at the same time in a certain extent. To a certain extent, it will also restrict the development of the company. Therefore, the reproduction of epoxy flooring color has become a concern and concern of various enterprises. 如何讓环氧环氧地坪顏值再現呢，重新鋪設，耗資大不說還影響企業的工作效率，在經濟可控還不影響工作效率的情況下，各個企業紛紛采用环氧地坪翻新讓环氧地坪顏值再現，那环氧地坪的翻新流程都有哪些呢？
How to make the epoxy flooring color reproduction, re-laying, not to mention the cost,彩色沥清地坪 but also affect the work efficiency of enterprises, in the case of economic controllability does not affect the work efficiency, various enterprises have adopted the floor renovation to make the epoxy flooring color reproduction, then what are the renovation processes of the epoxy flooring?
1、清除舊地坪
1. Remove old floors.
首先第一步，鑫和顏麗小編建議施工團隊要清除掉已經壞掉的地坪。這些毀壞的地坪要用機器設備全部研磨幹凈，打磨掉破損部分後還要清除掉油污油垢。因為如果不清除幹凈，也不能往上施工，這樣的話容易導致修補不好原先的裂縫。造成更大的損失。所以我們每一步都要仔仔細細地規劃。
First, the first step, Xin and Yan Li Xiaobian suggested that the construction team should clear the damaged floor. These damaged floors should be completely polished with machinery and equipment, and after polishing the damaged parts, oil dirt and grease should be removed. Because if it is not cleaned up, it can not be constructed upwards, which will easily lead to poor repair of the original cracks. Causing greater losses. So we must plan carefully every step.
2、清除油垢、油漬
2. Remove grease stains and grease stains.
如果發現地面有油污時，一定要將油漬清除幹凈。洛陽鑫和顏麗小編建議施工人員可根據實際情況連續進行2~5遍的脫脂、脫油。等待表面幹凈後，再進行新地坪施工。
If there is oil contamination on the ground, remove the grease stains. Luoyang Xin and Yan Li Xiaobian suggest that the constructors can degrease and degrease 2 to 5 times continuously according to the actual situation. After the surface is clean, new floor con透水地坪struction will be carried out.
3、裂縫處理
3, crack treatment
裂縫的出現常常是因為施工技術不佳或是材料本身出現問題，當發現舊地坪有裂縫時，要先對裂縫進行處理，可以使用切割機將基底的裂縫切割出V形槽，然後再將V形槽裡的雜物清除幹凈，將專用修補环氧砂漿材料灌入，使其與基底達到平整。
Cracks often occur because of poor construction technology or material problems. When cracks are found in the old floor, cracks should be treated first. The cracks in the base can be cut out of V-grooves by cutting machine, and then the debris in the V-grooves can be cleaned up, and special epoxy mortar material can be poured in to make it and the V-grooves. The substrate is smooth.
4、坑洞處理
4. Pit handling
坑洞會嚴重影響地面找平，所以建議先用打磨機對地面進行打磨處理，再將地坪有空鼓的地方敲掉或鏟除，使用高強度的水泥或是砂漿對坑洞進行修補處理。
The pit will seriously affect the leveling of the ground, so it is suggested that the ground should be polished with a grinder first, then the empty drum of the floor should be knocked out or eradicated, and the pit should be repaired with high strength cement or mortar.
5、重做面塗
5, redo the surface coating.
做完所有基本地面處理後，再做上1-2遍环氧地坪面漆，地坪就會顏值再現啦！
Finish all the basic ground treatment, and then do 1 - 2 times of epoxy flooring finish, the flooring will be color reproduction!