車間廠房裡的环氧地坪如何快速翻新

一般的环氧地坪正常使用年限大約是5~15年，然後在後續的使用中环氧地坪會逐漸出現一些問題，這時就是提醒您，應該對舊环氧地坪進行維修瞭印花地坪。如何能讓普通的环氧地坪或者环氧地坪翻新後使用年限增加，耐磨性耐劃痕等性能增強呢？
The normal service life of epoxy flooring is about 5 to 15 years, and then there will be some problems gradually in the subsequent use of the flooring, which is to remind you that the old epoxy flooring should be repaired. How can we make ordinary epoxy floors or epoxy floors after renovation service life increase, wear resistance, scratch resistance and other performance enhancement? 我們的廠房為使其生產环境符合要求，就要對廠房升級改造，墻面、地面也就需要翻新處理。如電子廠房地面是否符合防靜電要求，食品廠墻面是否符合抗菌、耐高溫要求，煙廠、酒廠車間的墻面是否符合防黴要求。當然，各類廠房的翻新改造不需要過於時尚奢侈的操作，重點在於廠房的實用價值、滿足使用性和裝修質量的保障。
In order to make the production environment of our factory meet the requirements, it is necessary to upgrade and renovate the factory buildings, and the walls and floors need to be renovated. If the floor of electronic factory meets the requirements of anti-static, the wall of food factory meets the requirements of anti-bacterial and high temperature resistance, and the wall of tobacco factory and wine factory meets t环氧地坪he requirements of anti-mildew. Of course, the renovation and transformation of all kinds of factory buildings need not be too fashionable and luxurious operation, the focus is on the practical value of the factory buildings, to meet the use and the quality of decoration.

特別對於一些工業場所，因為有機械的運行和很多車輛的碾壓，环氧地坪漆的亮度會降低，环氧地坪表面還可能出現一些劃痕，嚴重的甚至會出現開裂、地坪漆剝落等現象。這些現象不僅嚴重影響瞭工業廠房的形象，更會導致生產效率低下。所以，需要將舊环氧地坪漆進行翻新，重新得到更好的使用。
Especially for some industrial sites, because of the operation of machinery and the rolling of many vehicles, the brightness of epoxy floor paint will be reduced, and some scratches may appear on the surface of the floor, even cracking and peeling of the floor paint will occur seriously. These phenomena not only seriously affect the image of the industrial plant, but also lead to low productivity. Therefore, it is necessary to refurbish the old epoxy floor paint and get better use again.
舊环氧地坪翻新的主要步驟：
The main steps of renovation of old epoxy floor are:
1.清理舊环氧地坪表面，鏟除剝落掉的地方，打磨；空鼓或者凹陷的需要用砂漿填平。
1. Clean up the surface of the old epoxy floor, remove the peeling off place, polish; empty drum or depression need to be filled with mortar.
2.使用膩子層或者是中塗一遍，使环氧地面更平整，最後再上一層面漆。
2. use putty coating or middle coating to make the epoxy surface more smooth, and finally add a top coat.