廠傢告訴你舊环氧地坪為何需要翻新？

工業領域环氧地坪使用瞭5-15年會出現失光變舊、出現裂紋、空鼓、起砂起皮、劃痕等等；环氧地坪的重塑“青春”也就成瞭各領域比較關註的問題。為何舊环氧地坪翻新呢？1.潔凈車間要求符合GMP標準，潔凈度的要求較高，环氧地坪舊瞭就必須翻新。
In the industrial field, epoxy flooring has been used for 5-15 years, and there will be light loss, aging, cracks, empty drum, sand and peeling, scratches and so on. The reconstruction of "youth" of epoxy flooring has become a more concerned issue in various fields. W透水地坪hy is the old epoxy floor refurbished?
1. Clean workshop requirements meet GMP standards, cleanliness requirements are higher, the old epoxy floor must be renovated.
2.生產車間專配的機械設備比較精密，車間环氧地坪變舊容易起砂起塵，極易對設備造成損傷；最後導致耽誤生產、延誤訂單又要花去公司很多經費來維修機械設備，給公司造成非常大的損失；
2. Specialized machinery and equipment of production workshop are more precise, the floor of workshop becomes old and easy to sand and dust, which is very easy to cause damage to equipment; finally, delaying production and delaying order环氧地坪s will cost the company a lot of money to repair machinery and equipment, which will cause great losses to the company.
3.電子車間加工生產的是精密電子元器件，對地面的潔凈度要求也較高，一旦舊环氧地坪起砂起塵等就會使產品質量造成影響，同時也會給公司帶來經濟損失及公司形式破壞；
3. Precision electronic components are processed and produced in the electronic workshop, which requires high cleanliness of the ground. Once the old epoxy floor is sanded and dusted, the product quality will be affected. At the same time, it will bring economic losses and damage to the form of the company.
4.环氧环氧地坪破舊後，若不及時翻新處理，公司相關認證（如：iso9001、iso14000等）無法通過；
4. After the epoxy floor is worn out, if it is not renovated in time, the relevant certification of the company (e.g. iso9001, iso14000, etc.) can not pass.
舊环氧地坪怎麼去翻新？
How can the old epoxy floor be renovated?
方案一：對地面要求承重載、耐沖擊的機械加工車間；對舊地面銑刨，再施工环氧砂漿或者环氧彩砂地坪。翻新後能承受重壓，耐磨、耐沖擊、經久耐用、防塵、易清潔。
Scheme 1: Mechanical processing workshop with load-bearing and impact-resistant requirements for the ground; milling of the old ground, and then construction of epoxy mortar or epoxy coloured sand floor. After refurbishing, it can withstand heavy pressure, wear resistance, impact resistance, durable, dust-proof and easy to clean.
方案二：對地面的潔凈度及美觀度要求較高；對舊地坪進行打磨、清理、修補，再施工环氧自流平地坪。翻新後表面光潔、美觀、易清潔，耐酸、堿、鹽、油類腐蝕，特別是耐強堿性能好、潔凈。
Scheme 2: The cleanliness and aesthetics of the ground are required to be high; the old ground is polished, cleaned and repaired, and then the epoxy self-leveling ground is constructed. After renovation, the surface is smooth, beautiful, easy to clean, acid, alkali, salt, oil corrosion resistance, especially strong alkali resistance, good and clean.
方案三：塑立得專屬舊地面翻新系統；對舊环氧地坪、無機地坪等打磨清理、修補、吸塵。直接塗刷塑立得防護面塗施工。翻新後增加瞭环氧地坪使用年限，耐磨耐劃痕等性能增強，施工簡便、功能性提升非常明顯。塑立得產品是舊环氧地坪翻新的不二的選擇。
Scheme 3: The old ground renovation system is exclusive to Plastic Ride; the old epoxy floor and inorganic floor are polished, cleaned, repaired and cleaned. The construction of the protective coating is directly coated with plastic. After renovation, the service life of epoxy floor is increased, the wear resistance, scratch resistance and other properties are enhanced, and the construction is simple and the functional improvement is obvious. Plastic products are the best choice for renovation of old epoxy floor.