薄塗环氧地坪漆施工之前素地處理需要註意哪些

在薄塗环氧地坪漆施工之前做的素面清理處理是其步驟中最重要的一环，素面處理的好壞決定著环氧樹脂地坪漆的施工檢測合格通過，一般我們在做素面處理的幾種常見方法有以下幾種：1、如果您的場地是剛竣工的水泥地面，一般都是需要經過25-30天左右的基本保養後才能在上面施工。
The plain surface cleaning treatment before the construction of thin coated epoxy floor paint is the most important part of its steps. The quality of plain surface treatment determines the qualified construction test of epoxy floor paint. Generally it takes 25-30 days or so for basic maintenance before construction can be carried out. 2、施工前，地面上的各種舊油漆，垃圾等等廢物。
2, before construction, all kinds of old paint, rubbish and so on on the ground.
3、施工前，必須要徹底清除表面的油污，市面很多污腐蝕，污污染清除劑。
3, before construction, we must thoroughly remove the surface oil pollution, the market is a lot of pollution, pollution, scavengers.
4、施工前，必須要保證場地幹燥，潮濕有水漬的地方要清洗幹凈。
4, before construction, we must ensure that the site is dry and wet and water stains should be cleaned.
5、施工前，需要使用除塵器來進行地面清塵處理。
5, before construction, dust remover should be used for surface dust disposal.
6、环氧地坪地面如果出現打毛，則是使用無塵打磨機來處理，再使用清塵器進行清理。
6. If the ground surface is hairing, it is treated by a dust-free grinder, and 彩色沥清地坪then cleaned by a dust cl透水地坪eaner.
由於薄塗环氧地坪漆屬於非常薄的环氧地坪漆，所以在素面處理的方面顯的非常重要！
Because the thin coated epoxy floor paint belongs to very thin floor paint, so in plain surface treatment is very important!