环氧地坪漆施工後為什麼會失去光澤

重要成分是环氧樹脂、环氧地坪漆,由於环氧樹脂本身的分子結構,使得有必要在將來產生反應和固化劑的能力,使之不溶,而不是熔融的聚合物,即环氧地坪漆.在施工過程中,添加劑的精確運行和構圖,都會對城市环氧樹脂的性能產生影響,环氧地坪漆在施工過程中總會出現這種或那種問題.
Epoxy resin and epoxy floor paint are important ingredients. Because of the molecular structure of epoxy resin, it is necessary to produce the ability of reaction and curing agent in the future to make them insoluble, rather than melting polymer, i.e. epoxy floor paint. The impact of epoxy floor paint in the construction process will always have this or that problem.
其中是瞭环氧底漆的光的問題.环氧地坪漆的損耗會嚴重影響环氧地坪的表面質量,因此應加強印花地坪防護.因此,在环氧樹脂中的光損耗的原因是什麼?我們應該怎麼做才能防止它呢?以下是詳細的掌握.
The loss of the epoxy floor paint will seriously affect the surface quality of the epoxy floor, so protection should be strengthened. Therefore, what is the cause of the loss of light in the epoxy resin? What should we do to prevent it? Here is a detailed grasp.
在施工條件下濕度太高揮發漆膜易濕,吊車發光.預防措施:在施工情況濕度不應過度.
Under construction conditions, the humidity is too high, the volatile paint film is easy to be wet, and the crane emits light.
高沸點稀釋劑如油過度建設.預防:稀釋劑的用量不宜過量,應防止油等高沸點溶劑的幹擾.
High boiling point diluents such as oil overconstruction. Prevention: The amount of diluent should not be excessive, should prevent the interference of high boiling point solvent such as oil.
表面不幹凈,含有酸、堿、油污、蠟和水.這是施工前問我們,放在一般情況下應該是幹凈的.
The surface is not clean, co透水地坪ntaining acid, alkali, oil, wax and water. This is the construction before asking us, in general, should be clean.
油漆是水分或在建設高.防治:應控制水的含水量,施工時不得混入水.
Paint is water or high in construction. Prevention and control: water content of water should be controlled, and water should not be mixed during construction.
overrough或多孔塗層底漆,可使环氧樹脂地坪的損失.這種註意刺激环氧地坪漆要出光需要通過表面操作底漆來進行封閉、膩子填充、拋光.
Overrough or porous primers can cause loss of the epoxy floor. This attention stimulates the gloss of the epoxy floor paint by surface-operated primers for sealing, putty filling, and polishing.
以前的電影是完全幹燥的雨水或露珠.預防:防止在幹燥過程中的雨水或露水浸潤.柔軟的塗層和良好的抗劃傷性.預防:根據塗料的操作條件,選擇具有良好耐候性和抗劃傷性能的塗料.
Previous movies were completely dry rain or dew drops. Prevention: Preventing rain or dew infiltration during drying. Soft coatings and good scratch resistance. Prevention: Choosing coatings with good weather resistance and scratch resistance according to the operating conditions of the coatings.