廠傢解讀环氧地坪失去光澤的原因和解決辦法

我們都知道，越平整光線反射越強，光澤度越好，如果固化环氧地坪完工後不平整，光澤度一般都不會太好，這就要求我們在基面處理的時候一定要先將环氧地坪。 打磨平整，平整的地面不但有利於固化劑材料的均勻滲透，也能讓固化环氧地坪的整體效果更佳。
As we all know, the smoother the light reflects, the better the glossiness. If the cured floor is not smooth after completion, the glossiness is generally not very good, which requires us to treat the epoxy floor first. Grinding flat, flat ground is not only conducive to the uniform penetration of curing agent materials, but also make the overall effect of the curing floor better.
固化地坪施工打磨不均勻
Uneven construction of solidified floor construction
打磨作為固化地坪最為重要的一個环節，我們在施工過程中一定不能馬虎，嚴格按照廠傢制定的標準施工流程來執行，橫向豎向交叉打磨，不少磨漏磨。
As one of the most important links of the solidified floor, we must not be careless in the construction process, strictly in accordance with the standard construction process formulated by the manufacturer to carry out, horizontal and vertical cross-grinding, a lot of abrasion.
固化劑材料用量不夠
The amount of curing agent is not enough.
固化劑的使用劑量一定要符合工藝要求，施工單位不要為瞭節約材料成本而壓縮整個工程的質量。
The dosage of curing agent must meet the technological requirements, and construction units should not compress the quality of the whole project in order to save material costs.
剛做好的环氧地坪經常會因為表面出現一些瑕疵而影響地坪的整體效果，像有些环氧地坪因施工不當，剛噴塗完的塗層表面就會呈現乳白色，像雲一樣變白而且黯淡無光，不但影響其外觀，甚至降低瞭其使用性能，那麼造成這個問題的主要原因是什麼呢？美地寶給大傢分享失去光澤度的四大原因及四大措施。
Fresh epoxy floors are often affected by surface defects, such as some epoxy fl环氧地坪oors due to improper construction, just sprayed coating surface will appear Milky white, cloudy white and dull, not only affect 印花地坪its appearance, and even reduce its performance, then cause this What is the main reason for this problem? Mei Di Bao to share with you four reasons for losing gloss and four major measures.
上海博歌-环氧地坪
Shanghai Bo Ge epoxy floor
上海博歌-环氧地坪
Shanghai Bo Ge epoxy floor
环氧地坪失去光澤的原因
Reasons for losing gloss of epoxy floor
1、濕度過高。在進行地面噴塗的時候由於地面濕度過高，導致其表面呈現乳白色色塊。
1. Humidity is too high. When the surface spraying is carried out, the surface humidity is too high, which causes the surface of the surface to appear milky white.
2、稀釋劑質量不合格。所使用的稀釋劑的品質不良，揮發太快。
2. The quality of the diluent is not qualified. The diluent used is of poor quality and volatilization too fast.
3、噴塗場所氣溫過低。尤其是在被噴塗的物體溫度低於室溫的時候。
3, the temperature of the spraying place is too low. Especially when the temperature of the object being sprayed is lower than that at room temperature.
4、噴塗室的空氣不流通，又缺乏加熱設備時也會導致這一情況。
4, the air in the spray room is not circulated, and the lack of heating equipment will also lead to this situation.
环氧地坪失去光澤的預防措施
Preventive measures for losing gloss of epoxy floor
1、在進行地坪漆施工時，要進行適當加熱，升高噴塗环境室溫。
1. During the construction of floor paint, proper heating should be carried out to raise the ambient temperature of spraying.
2、使用品質良好的稀釋劑，使用揮發較慢的稀釋劑。
2, use good quality diluent, use slower volatile diluent.
3、在稀釋劑內添加防潮劑，使用量藥效，否則會減慢幹燥速度。
3. Add moisture-proof agent in diluent, use amount of efficacy, otherwise it will slow down drying speed.
4、塗裝前使被噴塗的物體高於环境室溫10攝氏度左右。
4, before painting, the object being sprayed is higher than ambient temperature at 10 degrees Celsius.