环氧地坪漆表面出現粗糙原因及解決方法

在环氧地坪漆工程中，會出現各類的环氧地坪缺陷問題，那麼應該如何應對，現在就來對环氧地坪漆出現表面粗糙來簡單瞭解下原因以及如何解決：1、因為施工环境不幹凈，有較多的灰塵，灰塵黏在塗膜上就會出現粗糙;
In the epoxy floor paint project, there will be a variety of floor defects, then how to deal with it, now to epoxy floor paint surface roughness to understand the reasons and how to solve: 1, because the construction environment is not clean, there is more dust, dust will appear on the film roughness;
2、調配好的环氧地坪漆工程材料沒有經過過濾就直接透水地坪使用瞭，使雜質混入裡面，當塗膜幹燥之後就會在环氧地坪漆工程上顯示出來;
2. The prepared epoxy floor paint engineering materials are directly used without filtration, so that impurities are mixed into the interior, when the film is dry, it will be displayed in the epoxy floor paint project;
3、环氧地坪漆工程漆已經開始固化，仍然繼續施工，因為环氧地坪漆工程漆都是雙組分的，加入固化劑之後就會產生化學反應，然後固化成膜，如果已經開始固化，仍會施工完成，那就會導致粗糙;
3. The epoxy floor paint project paint has begun to solidify, still continue to work, because the epoxy floor paint project paint are two-component, after adding curing agent will produce chemical reaction, and then solidified into a film印花地坪, if it has begun to solidify, will still be completed, it will lead to roughness;
4、施工現場的溫度太高，使得稀釋劑揮發速度快，环氧地坪漆工程還沒有流平就已經固化。
4. The high temperature in the construction site makes the diluent evaporate quickly, and the epoxy floor paint has solidified before leveling.
車庫环氧地坪
Garage floor
解決环氧地坪漆工程漆出現粗糙表面的方法：
To solve the rough surface of epoxy floor paint,
1、在施工环氧地坪漆工程之前一定要將基面及現場清掃幹凈，將环氧地坪漆工程材料用過濾網過濾之後再施工。
1. Before the construction of epoxy floor paint project, the base and site must be cleaned, the epoxy floor paint project materials are filtered with a filter before the construction.
2、施工前要根據施工時間計算材料的用量，再嚴格按照塗料配比進行調配。
2, before construction, the amount of materials should be calculated according to the construction time, and then strictly allocated according to the coating ratio.
3、處理好下層，從底層開始就要按施工要求做好，中層要杜絕粗糙現象，面層施工前一定要把中層清理幹凈，確認無灰塵後再施工，這樣就可以解決环氧地坪漆工程該類的粗糙現象瞭。
3. Handle the lower layer well, from the bottom to do a good job in accordance with the construction requirements, the middle layer to prevent rough phenomenon, the surface layer must be cleaned up before the construction, to confirm that there is no dust after construction, so that can solve the epoxy floor paint project of this kind of rough phenomenon.