廠傢揭示环氧地坪施工出現明縫、暗縫該如何處

在环氧地坪施工中，經常會遇到地面上存在的一些問題，而像地面上明縫、暗縫、墻角伸縮縫是幾乎是每次施工都會遇到的，所以我們在施工中一定要知道處理這些問題的方法。下面就簡單介紹一下處理方法：
In the construction of epoxy floor, we often encounter some problems on the ground, such as open joints, dark joints, corner expansion joints are almost every construction will encounter, so we must know how to deal with these problems in the construction. The following is a brief introduction to the processing method:
一、环氧地坪暗縫的處理
First, the treatment of the dark seam of epoxy floor.
1、清除膨脹縫的沉積污物，使得膨脹的深度至少達25毫米;
1, remove the deposited dirt from expansion joints, so that the depth of expansion will reach at least 25 millimeters.
2、填入彈性墊襯物(通常是泡沫聚乙烯類)，墊襯物到地面的高度通常為縫寬的一半;
2, fil印花地坪l in the elastic pad (usually foam polyethylene), the height of the mat to the ground is usually half the width of the seam.
3、底塗後再用环氧砂漿填平縫隙;
3. Primer and then use epoxy mortar to fill the gap.
4、在膨脹縫上可再鋪上玻璃纖維加強網以加強修補材料附著強度防止開裂;
4. On the expansion joint, glass fiber reinforced mesh can be rebuilt to enhance the adhesion strength of the repair material and prevent cracking.
5、在加強網上塗上环氧地坪材料，完成膨脹縫處理。
5. We should strengthen the epoxy coating material on the web and complete the expansion joint treatment.
二、环氧地坪明縫的處理
Two. Treatment of open seam of epoxy floor.
1、在施工完成的表面沿膨脹縫切割;
1. Cut the surface along the expansion joint after completion of construction.
2、在縫的兩邊貼上分色紙;
2, attach colored paper on both sides of the seam.
3、填入彈性墊襯物(通常是泡沫聚乙烯類)，墊襯物到地面的高度通常為縫寬的一半;
3, fill in the elastic pad (usually foam polyethylene), the height of the mat to the ground is usually half the width of the seam.
4、在縫內打入填縫膠並壓實;
4. Insert sealant and compacted in the seam.
5、立刻撕去分色紙，完成明縫的透水地坪處理。
5, tear off the coloured paper immediately and finish the treatment of open seam.