施工混凝土密封固化劑後應如何打磨地面

施工混凝土密封固化劑後的地面，無論是強度還是密實度都有瞭明顯的提高，現在很多人總認為噴灑完混凝土密封固化劑就代表可以完工瞭。其實不然，例如剛鋪設的环氧地坪，就需要對地面進行勘察分析，看看地面是否需要打磨。一般來說大多數混凝土密封固化劑地面是需要進行打磨處理的。
After the construction of concrete sealant curing agent on the ground, both strength and compactness have been significantly improved, many people now believe that spraying concrete sealant on behalf of the completion of the. In fact, otherwise, for example, just laid the ground, we need to survey and analyze the ground to see if the ground needs to be polished. Generally speaking, most concrete sealing agents must be ground.
混凝土硬化环氧地坪
Concrete hardened floor
進行混凝土密封固化劑地面打磨前要先準備好打磨工具，而通常打磨地坪工具是選擇拋光機打磨，這需要是因為使用這個器械打磨後的光澤度更好一些。不過因為混凝土密封固化劑地面打磨工具體積比較龐大，因而對於一些角落地區是很難打磨到的，而這將影響整個环氧地坪工程的效果。對此現象，我們建議選擇手動打磨。
Prepare the grinding tools before grinding the concrete sealant floor, which is usually polished by a polishing machine because the gloss is better after using the tool. However, because of the large volume of ground grinding tools, it is difficult to grind in some corners, whi印花地坪ch will affect the effect of the entire epoxy floor project. We recommend manual grinding for this phenomenon.
相比手動打磨，機械打磨混凝土密封固化劑地面就顯得更為輕松瞭，施工人員不需要花費那麼多的力氣，但是采用機械打磨要記住打磨的時速最好操持勻速，不過快或者過慢，以至於使得地坪材料表面出現嚴重不均衡現象，而對於整個度非常差的地區，那麼就不需要顧忌那麼多瞭。
Comparing with manual polishing, mechanical polishing of concrete sealant is much easier. Construction workers do not need to spend so much effort, but mechanical polishing shou透水地坪ld remember that the best speed of polishing is to operate at a uniform speed, but too fast or too slow, so as to cause serious imbalance on the surface of floor materials. For the very poor area, there is no need to worry so much.