車庫环氧地坪漆在施工中的施工工藝

隨著科技的進步和各行各業的發展,我們每傢每戶對自己車庫的裝修要求也在不斷地提高,那麼現在裝修中,車庫环氧地坪漆的選擇多種多樣,到底車庫环氧地坪漆的施工工藝什麼樣呢?今天就給大傢來介紹一下關於車庫环氧地坪漆的相關知識。車庫环氧地坪漆的最佳選料——环氧樹脂地坪漆
With the progress of science and technology and the development of all walks of life, each of us on their own garage decoration requirements are constantly improving, so now decoration, garage floor paint choice is varied, in the end what kind of garage floor paint construction process? Today to introduce you about the garage floor paint related knowledge.
The best choice for car floor paint -- epoxy resin floor paint
环氧樹脂地坪漆又分為三類:平塗型环氧樹脂地坪(也被稱為薄塗型环氧樹脂或厚膜型环氧樹脂,厚度一般為0.3-0.5mm),环氧樹脂砂漿环氧地坪(即环氧砂漿环氧地坪,厚度一般為0.8-3mm),环氧樹脂自流平地坪,此三種环氧樹脂地坪均使用环氧樹脂做為成膜物質,前兩種地坪材料含有一定量的有機溶劑如二甲苯、正丁醇、丙酮等,施工時有一定的刺激性氣味,但施工完畢三天後即基本無有機溶劑揮發。环氧樹脂自流平地坪完全不含以上有機溶劑,是完全环保的地坪,更因為其100%的环氧樹脂含量,所以無論是耐磨性能、抗沖擊性能還是美觀度在常用的环氧樹脂地坪中均是最佳的。
Epoxy resin floor paints are divided into three categories: flat-coated epoxy resin floor (also known as thin-coated epoxy resin or thick-film epoxy resin, thickness is generally 0.3-0.5mm), epoxy resin mortar floor (epoxy mortar floor, thickness is generally 0.8-3mm), epoxy resin self-leveling floor, the three types of epoxy resin floor are made of epoxy resin. The first two kinds of floor materials contain a certain amount of organic solvents, such as xylene, n-butanol, acetone and so on. They have a certain irritating odor during construction, but there is no volatilization of organic solvents after three days of construction. Epoxy self-leveling floor is completely free of the above organic solvents, is completely environmentally friendly, but also because of its 100% epoxy resin content, so whether it is wear resistance, impact resistance or aesthetics in the commonly used epoxy floor are the best.
环氧地坪的優點:整體無縫,顏色純正飽和,可任意選擇幾種顏色搭配。表面光潔、極易清潔,防水防黴,抗滲,耐磨。
The advantages of epoxy floor: the whole seamless, color pure saturation, you can choose any color matching. The surface is bright and clean, easy to clean, waterproof and mildew proof, impermeable and wearable.
車庫地坪漆的施工方案：
Construction plan of garage floor paint:
1、停車區對於平整地面可采用平塗型环氧樹脂地坪,而平整度及表面強度較差的地面,可以采用环氧樹脂砂漿地坪或环氧樹脂自流平地坪,顏色可設計成灰色或綠色。
1. The parking area can adopt the flat-coated epoxy resin floor for the flat ground, while the flat and surface strength of the poor ground, can adopt epoxy resin mortar floor or epoxy resin self-leveling floor, the color can be designed into gray or green.
2、車行通道由於車行頻繁,相對於停車區,設計要加強,可采用 环氧樹脂砂漿地坪或环氧樹脂自流平地坪,顏色通常為綠色或灰色,車行通道寬度根據現場情況設置,通常雙向行車道不宜低於6米,單向行車道不宜低於3米,人行通道為1.5-2米,通道兩側劃中黃色標志線,線寬8-12mm。
2. Because of the frequent traffic, the design should be strengthened compared with the parking area. Epoxy resin mortar floor or epoxy resin self-leveling floor can be used. The color is usually green or grey. The width of the lane should be set according to the scene. Usually the 彩色沥清地坪two-way lane should not be less than 6 meters, the one-way lane should not be less than 3 meters, and the pedestrian lane should be 1.5-2 meters. Meters, the sides of the channel are marked with yellow markings, and the width is 8-12mm.
3、車行標志通道內可采用黃色或白色標志漆(可采用夜發花地坪漆)畫箭頭進行標明車行方向及指向各停車區,如A停車區、B停車區及C停車區等。
3. Yellow or white marking paint can be used in the lanes of traffic signs (night flower floor paint can be used) to draw arrows to indicate the direction of traffic and point to each parking area, such as A parking area, B parking area and C parking area.
4、停車位設置按停車場地面區域結構設置停車位,小轎車通常可設計為2.5-3.0米X5-6米,停車位采用黃色或白色標志線畫出,標線寬8-12mm。
4. The parking space is arranged according to the ground structure of the parking lot. The car can usually be designed as 2.5-3.0 m X5-6 M. The parking space is marked with yellow or white marking lines with a width of 8-12 mm.
5、柱面處理為增加停車場柱面的醒目性,避免因倒車碰到柱子,柱子下端1.0-1.2米以下可采用黃色和白色相間斜紋斑馬線進行標明。
5. Cylindrical treatment to increase the salience of the parking lot cylindrical, avoid backing against the column, the lower end of the column 1.0-1.2 meters below can be marked with yellow and white twill zebra crossing.
車庫地坪漆的施工工藝：
Construction technology of garage floor paint:
1、基面處理:打磨清潔,基面要求幹燥,平整無空鼓;
1, base surface treatment: grinding and cleaning, the base surface requires dry, smooth and empty drum.
2、塗刷底油:封閉基面,增強附著力;
2, brush the bottom oil: seal the base surface and enhance adhesion.
3、批刮砂漿中塗:增加地面的抗壓程度;
3. Batch scraping mortar coat印花地坪ing: increase the compressive strength of the ground;
4、批刮膩子:封閉砂漿層,使砂漿層平整無空鼓;
4. Batch scraping putty: Seal mortar layer to make mortar layer smooth without hollowing drum.
5、滾刷环氧面塗,亦可噴塗面塗或面層做防滑工藝。
5, roll brush epoxy surface coating, or spray coating or surface layer to prevent skid technology.