該如何確定金剛砂耐磨地坪的用料？

金剛砂耐磨地坪的主要材料是金屬或非金屬耐磨硬化骨料，而根據耐磨地坪的用途以及客戶的要求，耐磨地坪每平米的材料用量都有所不同，而且是有一定依據的。那麼，施工人員在施工的過程中，應該怎樣來確定金剛砂透水地坪耐磨环氧地坪的用料呢？
Diamond wear-resistant floor is mainly made of metal or non-metal wear-resistant hardening aggregate, and according to the use of wear-resistant floor and customer requirements, wear-resistant floor per square meter of material consumption are different, and there is a certain basis. Then, in the construction process, how should the construction personnel determine the diamond wear-resistant floor material?
1、首先我們要確定混凝土配比和水泥的標號。如果混凝土配比上砂子含量高，或水泥標號低，或沒有使用商業混凝土而直接手動攪拌的話，則需要加大金剛砂的用料。
1, first of all, we must determine the ratio of concrete and the grade of cement. If the sand content on the concrete mix is high, or the cement label is low, or if the commercial concrete is not used and the direct manual mixing, the diamond material needs to be increased.
2、作業前瞭解清楚客戶期望的地面使用壽命，根據客戶期望進行用量核算。
2, understand the customer's life expectancy before operation and calculate the consumption according to the customer's expectations.
3、要考慮地面所需要承受的壓力是多少，這樣才能有效提高环氧地坪的使用效率，一般來說我們把基層抗壓強度的最小范圍設計在25mpa范圍內。
3. We should consider how much pressure the ground needs to bear in order to effectively improve the efficien环氧地坪cy of the use of the floor. Generally speaking, we design the minimum compressive strength of the base within 25 mpa.