施工時如何解決环氧自流平地坪起泡問題

环氧自流平地坪具備高度潔凈的功能。雖然环氧自流平地坪具有环保、光亮以及一次性成膜厚等特點，但他的缺點是容易起泡。环氧自流平地坪起泡為分兩種：針孔型氣泡和沉降式錐型氣泡。兩種形式上的氣泡除瞭外型上有區別，其形成的原因也是不同的。專註环氧地坪行業18年，盈凱环氧地坪為大傢對比以下兩者形成的原因以及該如何預防與補救：
The epoxy self leveling floor has a highly clean function. Although epoxy self-leveling floor has the characteristics of environmental protection, brightness and one-off film thickness, but its disadvantage is easy to foam. There are two kinds of bubbles in epoxy self leveling flat ground: pinhole bubble and sedimentation cone type bubble. The two forms of bubbles are different in appearance except for their appearance. Focused on the floor industry for 18 years, Yingkai floor for everyone to compare the following two causes of formation and how to prevent and remedy:
1、环氧自流平地坪兩種起泡現象形成的原因
1. Reasons for the formation of two frothing phenomena on the epoxy self leveling floor.
針孔型氣泡：由於在材料混合時發生起泡上浮，而且材料的稠度不夠導致起泡上升至表面破裂，產生透水地坪像針孔一樣的空泡；
Pinhole bubbles: bubbles rise to the surface of the material due to the bubbling and bubbling when the material is mixed, and the material is not thick enough to cause the bubble to rise to the surface rupture, resulting in a pinhole-like bubble;
沉降式錐型氣泡：因為混凝土內部水汽上升進入漆膜層形成氣泡和基面不夠封閉以致材料缺水而引發的氣泡。
Settlement cone bubble: because the water vapor inside the concrete rises into the paint film layer to form bubbles and the base surface is not closed enough to cause material water shortage caused by bubbles.
2、該如何預防“氣泡”這一現象的發生？
2, how to prevent the occurrence of "bubble" phenomenon?
針對环氧自流平地坪“針孔氣泡”，在攪拌材料時因采用機械，因為手動攪拌慢、難均勻、易氣泡，還要適當添加“消泡劑”。而环氧自流平“沉降式錐型氣泡”需嚴格封閉地面，便可避免。
In view of the "pinhole bubble" in the epoxy self-leveling floor, mechanical stirring materials are used, because manual stirring is slow, difficult to uniform, easy to bubble, but also appropriate addition of "defoamer". The 彩色沥清地坪epoxy self leveling "settling cone type bubble" needs to be strictly closed to the ground, which can be avoided.
3、補救“起泡”現象的措施
3, measures to remedy the phenomenon of blistering.
一旦施工环氧自流平地坪後“起泡”，可以采用“消泡滾筒”進行處理。
Once the epoxy self leveling floor is "frothing", the "defoaming drum" can be used for processing.