如何為地坪選擇合適的环氧地坪漆呢

工業环氧地坪漆品種繁多，不同品種的环氧地坪漆都有不同的性能；不同的地面情況、使用性能以及客戶要求所需要的环氧地坪漆也不一樣，那麼客戶應該依據什麼來選擇工業地坪品種的呢？ 地坪漆公司根據16年餘地坪漆施工經驗，總結出以下幾點選擇工業地坪品種的因素供大傢參考：
There are many kinds of industrial floor coatings, different kinds of epoxy floor coatings have different properties; different ground conditions, performance and customer requirements of floor coatings are not the same, so what should customers choose industrial floor coatings? Based on more than 16 years of construction experience of floor paint, the following factors for selec透水地坪ting industrial floor paint varieties are summarized for your reference.
1、衛生
1. Health
許多現代工業如：醫藥，化妝品，食品，飲料，化學和電子業，都有相同的衛生要求，這些工業的制造過程都要求類似“潔凈室”的工作环境，如地面必須完全無塵，沒有裂縫和直角轉角，容易清洗，並能滿足其他各項要求，如抗化學品腐蝕能力和抗械磨損能力。
Many modern industries, such as medicine, cosmetics, food, beverage, chemistry and electronics, have the same hygiene requirements. The manufacturing process of these industries requires a clean room-like working environment, such as the ground must be completely dust-free, free of cracks and right angles, easy to clean, and able to meet other requirements. Such as resistance to chemical corrosion and wear resistance.
2、防滑
2. Antiskid
行人區對防滑程度的要求取決於环境的幹濕度，考慮地面的表面要求時應註意其防滑性越好。然而粗糙的地面很難達到清潔和衛生要求，因此兩者須取得平衡。因此中國环氧樹脂行業協會專傢建議根椐不同的防滑要求來設計地坪，且滿足其他的各項要求。
The degree of skid resistance of pedestrian area depends on the dry and humidity of the environment. When considering the surface requirements of the ground, we should pay attention to the better skid resistance. However, rough surfaces are difficult to achieve cleanliness and hygiene requirements, so they need to be balanced. Therefore, experts from China Epoxy Resin Industry Association suggest that different anti-skid requirements should be taken into account to design floors and meet other requirements.
3、沖擊性/點荷載
3. Impact / point load
在貨物經常在某些區域集中存放或搬運的情形下，例如生產線、倉庫、裝貨碼頭等，地坪的設計必須適合於這些物定的工作條件。裝有貨物的卡車，托盤等物的 運動將產生壓力負荷，如果沒有給局部負荷設計預留，則很容易出現損壞。另外很重要的是必須保證所產生的應力不高於整個地坪系統材料所能承受的壓力。
In cases where goods are often stored or handled centrally in certain areas, such as production lines, warehouses, loading terminals, etc., the floor design must be suitable for these specified working conditions. The movement of trucks, pallets, etc. loaded with cargo will produce pressure loads, which can easily be damaged if the local load design is not reserved. It is also important to ensure that the stresses generated are not higher than those of the entire floor system material.
4、機械磨損
4. Mechanical wear
工業地坪設計時需考慮耐沖擊和機械磨損等物理要求。通常，最大的磨損發生在叉車通道或一些特定的區域，這些地面需進行特殊的處理。
Industrial floor design should consider physical requirements such as impact resistance and mechanical wear. Usually, the greatest wear and tear occurs in forklift passages or in specific areas where special treatment is required.
5、抗化學品腐蝕
5, chemical corrosion resistance
不僅要考慮車間存在的單種化學品對地面的影響，而且應考慮潛在的化學反應，假如有化學物質在地面上混彩色沥清地坪合會怎樣？濺潑時或蒸發後的最濃或最稀濃度是多少？高溫常會提高化學品的活性—特別是強酸和強堿。在一些潛在濺潑區如生產、倉庫和運貨區，溫度也是一個重要因素。
Consideration should be given not only to the effect of the presence of a single chemical on the ground, but also to potential chemical reactions. What if chemicals were mixed on the ground? What is the thickest or thinnest concentration of spatter or evaporation? High temperature often improves the activity of chemicals, especially strong acids and strong bases. In some potential splash areas such as production, warehouses and freight areas, temperature is also an important factor.
6、溫度
6. Temperature
溫度的劇烈變化是引起傳統的环氧樹脂工業地坪失敗的主要原因。因此非常重要的一點是不僅要考慮操作機器的溫度和生產流程的產品溫度，還要考慮鄰近區域的溫度。在某些區域經常進行一些活動，如高壓蒸煮、烹調、消毒或冰凍等，溫度經常處於極端狀態，那麼這些區域需進行特殊處理。
The dramatic change in temperature is the main cause of the failure of the traditional epoxy industrial floor. Therefore, it is very important to consider not only the operating machine temperature and the product temperature of the production process, but also the temperature of the adjacent area. In some areas, activities such as high-pressure cooking, cooking, disinfection or freezing are often carried out, and the temperature is often in extreme conditions, so these areas need special treatment.
7、不滲透
7, impermeable
當今的环境要求地面塗層必須抗滲透，以保存護混凝土和地下水免受滴漏的水和污染物的影響。有時不滲透的地面僅僅用於防止具有化學腐蝕性的液態污染物的浸透，如：金屬加工業，鍍鋅，食品加工業(奶制品，肉類，蔬菜)，另外清洗時也會接觸一些化學品，如：清洗劑，蒸汽和機械。
Today's environment requires surface coatings to be impermeable to protect concrete and groundwater from dripping water and pollutants. Sometimes impermeable ground is only used to prevent the penetration of chemically corrosive liquid contaminants, such as metalworking, zinc plating, food processing (dairy products, meat, vegetables), and cleaning with chemicals such as detergents, steam and machinery.