為什麼要對环氧地坪進行打蠟養護?

环氧地坪養護蠟的施工非常方便，隻需要將養護蠟均勻的輥塗在环氧地坪漆漆膜表面，然後使用洗滌翻新機進行拋光、壓實就行。不過蠟養護層，很容易用鋒利的物質刮下來，所以要盡量的薄一點，這樣才不至於降低环氧地坪漆的功效，又能起到養護的目的。耐磨地坪小編淺談為什麼要對环氧地坪進行打蠟養護?
The construction of epoxy floor maintenance wax is very convenient. It only needs to coat the uniform roller of the maintenance wax on the surface of the floor paint film, and then use the washing and renovating machine to polish and compact it. However, wax curing layer, it is easy to scrape off with sharp substances, so try to be as thin as possible, so as not to reduce the efficacy of epoxy floor paint, but also can play a maintenance purpose. Wear-resistant flooring knitting brief talk about why the epoxy flooring wax maintenance? 1、光亮，打蠟可以起到增亮的效果。對於一些需要更光亮的环氧地坪體驗的客戶，有些地坪公司就會使用打蠟進行增亮處理。一般來說打蠟可以將地坪亮度提高到80左右。
1. Bright, waxing can play a brightening effect. For some customers who need a brighter floor experience, some floor companies will use waxing to brighten the floor. Generally speaking, waxing can increase the brightness of the floor to about 80.
2、耐磨，用戶做養護作用的蠟表層非常堅硬，可以提高地坪的硬度，而且等於在环氧地坪漆的表層再一次強化，起到保護的作用。
2. Wear-resistant, user-friendly wax surface is very hard, can improve the hardness of the floor, and is equivalent to strengthening the surface of epoxy floor paint again, playing a protective role.
3、环保，養護蠟屬於水性材料，對地面沒有腐蝕性，不會對环氧地坪漆漆膜造成損害，同時不會揮發出對人體有害的氣體，可以放心使用。
3. Environmental protection, maintenance wax belongs to water-borne materials. It is not corrosive to the ground and will not cause damage to the epoxy floor paint film, and will not volatilize harmful gases to human body. It can be used safely.
环氧地坪打蠟養護的步驟：
The steps of waxing and curing epoxy floor are as follows:
1、清理地面垃圾和雜物,豎立施工指示牌，地面清潔，首先用洗地機加中性清潔劑將地面清洗幹凈，然後用吸塵器洗盡地面污水。如果用全自動洗地機清潔地面效果將更好。然後晾幹地面，等待下一步工序。
1. Clean up the ground rubbish and透水地坪 debris, erect construction signs, and clean the ground. First, clean the grou环氧地坪nd with a floor washer and neutral detergent, and then wash the ground sewage with a vacuum cleaner. It would be better to clean the floor with a fully automatic floor washer. Then dry the ground and wait for the next step.
2、佈蠟，用蠟拖將环氧地坪蠟呈“∞”字形均勻拖佈到地面上。在拖佈時要註意每次蘸取蠟量要盡量均勻一致，由前向後依次操作。另外要註意的是對於大面積环氧地坪佈蠟可將多名工人一字排開，並穿好鞋套，同時操作，不得遺漏。佈蠟後待蠟層晾幹後可根據實際情況進行二次佈蠟，方法同第一次。
2. To distribute wax, the epoxy floor wax is evenly distributed to the ground in the shape of ____________ When mopping cloth, attention should be paid to the uniform amount of wax dipped in each time, and the operation should be from front to back. In addition, it should be noted that for large area of epoxy floor wax, many workers can be arranged word by word, and wear shoes, while operating, not to be omitted. After the wax layer is dried, the wax can be distributed twice according to the actual situation. The method is the same as the first one.
3、拋光，待蠟層幹透後可以用拋光機加拋光墊對环氧地坪做拋光處理，增加地面光澤度。
3. Polishing. After the wax layer is dried out, the epoxy floor can be polished with a polishing machine and a polishing pad to increase the gloss of the ground.
在地面打蠟後的小時內地面盡量不要使用，尤其是車輛及重物不得碾壓或拉劃。环氧地坪打蠟保養的周期需要根據實際的使用情況確定，下次打蠟時需要將原有蠟層去除，方可獲得最佳效果。
Do not use it on the ground for hours after waxing, especially vehicles and heavy objects should not be rolled or drawn. The maintenance cycle of epoxy floor waxing needs to be determined according to the actual use. The original wax layer needs to be removed in the next waxing process in order to obtain the best effect.
4、等到底蠟幹燥後,再在其表面均勻的落兩遍面蠟並風幹;
4. After the base wax is dried, the wax is evenly dropped twice on its surface and dried by air.
5、在幹凈幹燥的地板表面均勻落兩遍底蠟並風幹;
5. Drop the bottom wax twice on the clean and dry floor surface and air-dry it.