客戶驗收环氧地坪需要把握哪些要素？

為保證环氧地坪的質量，更好地發揮出环氧地坪的優勢性能，我們不僅要嚴格選材，由專業的團隊進行施工以及做好養護工作。已通過瞭ISO9001質量管理體系認證的正歐，其相關專傢提醒:做好环氧地坪驗收工作也是至關重要的。驗收环氧地坪需要把握哪些細節呢，环氧地坪廠傢相關專傢總結如下：
In order to ensure the quality of epoxy flooring and give full play to its superior performance, we should not only strictly select materials, but also carry out construction and maintenance by professional teams. Zhengzhou and Europe, which have passed the certification of ISO 9001 quality management system, are reminded by relevant experts that it is also essential to do a good job in acceptance of epoxy flooring. What details should be grasped in a印花地坪cceptance of epoxy flooring? Experts from epoxy flooring manufacturers summarize as follows:
1、环境溫度為25℃時，施工後2-3天應達到實幹，即硬度達到完成固化的80%左右;
1. When the ambient temperature is 25 C, the hardness should reach about 80% of the solidification after 2-3 days of construction.
2、表面不能出現發粘現象;
2. No sticking ca环氧地坪n occur on the surface.
3、氣泡:平塗型、砂漿型無氣泡，自流平允許1個小氣泡/10平方米;
3. Bubbles: flat coating and mortar without bubbles, self-leveling allows one small bubbles per 10 square meters;
4、流平性好，無鏝刀痕，大面積接口處基本平整;
4. It has good leveling, no trowel mark and smooth interface in large area.
5、無浮色發花，顏色均勻一致，大面積接口處允許有極不明顯的色差;
5. No float, uniform and uniform colors, allowed to have very little obvious color difference at large areas of the interface;
6、無粗雜質，但允許有空氣中的浮塵掉落在造成的極小缺陷;
6. There are no coarse impurities, but the dust in the air is allowed to fall on the minimal defects.
7、环氧地坪表面應平整平滑，光澤度應達到設計要求(高光澤≥90、有光≥70、半光50~70)，平塗型為有光、水性為半光~無光;
7. The surface of the floor should be smooth and smooth, and the glossiness should meet the design requirements (high gloss (> 90), gloss (> 70), half gloss (> 50 ~ 70), and the flat coating type should be glossy and water-based should be half glossy (~dull).
8、桔皮、砂漿防滑面效果應很明顯。
8. The anti-skid surface effect of orange peel and mortar should be obvious.
集环氧环氧地坪研發、生產、施工服務於一體，將繼續堅持以新技術、新產品、新服務為己任，致力於帶來更多高品質、綠色环保性能優的地坪材料與專業的施工服務。從選材到施工養護，正歐精益求精鑄造品質，推動中國地坪產業的新發展新突破。
Zhengou, which integrates R&D, production and construction services of epoxy flooring, will continue to insist on taking new technology, new products and new services as its responsibility and devote itself to bringing more high-quality, green and environment-friendly flooring materials and professional construction services. From material selection to construction maintenance, Zhengzhou and Europe strive to improve casting quality and promote new breakthroughs in the development of China's floor industry.