廠傢總結冷凝器使用時需要註意什麼？

冷凝器是一種反應設備，在操作的時候一定要註意，否則會因為很多原因造成損壞，導致生產被迫停止。冷凝器的操作要註意很多方面。1，一定要嚴格的按照規章制度去操作冷凝器。2，在操作前，應仔細檢查有無異狀，在正常運行中，不得打開上蓋和觸及板上之接線端子，以免觸電;嚴禁帶壓操作;用氮氣試壓的過程中，仔細觀察壓力表的變化，達到試壓壓力，立即關閉氮氣閥門開關;升溫速度不宜太快，加壓亦應緩慢進行，尤其是攪拌速度，隻允許緩慢升速。
Condenser is a kind of reaction equipment, we must pay attention to it when operating, otherwise, it will be damaged for many reasons, resulting in production being forced to stop. Condenser operation should pay attention to many aspects. 1. Condensers must be operated in strict accordance with the rules and regulations. 2. Before operation, we should carefully check whether there is any abnormality. In normal operation, we should not open the terminal of the upper cover and tou环氧地坪ch the board to avoid electric shock; strictly prohibit the operation with pressure; in the process of nitrogen pressure test, we should carefully observe the change of pressure gauge to reach the pressure test and close the nitrogen valve switch immediately; the heating speed should not be too fast, and the pressure should be slow, especially the stirring speed. Allow slow rise.
3，冷凝器體加熱到較高溫度時，不要和釜體接觸，以免燙傷;實驗完應該先降溫。不得速冷，以防過大的溫差壓透水地坪力造成損壞。同時要及時的拔掉電源。
3. When the condenser body is heated to a higher temperature, do not contact the kettle body in order to avoid scalding; the temperature should be lowered first after the experiment. Do not cool quickly in case of damage caused by excessive temperature difference and pressure. At the same time, the power supply should be pulled out in time.
同時冷凝器使用後要註意去保養，這樣高壓釜才能有更好的使用壽命。
At the same time, after using the condenser, attention should be paid to maintenance, so that the autoclave can have a better service life.
辛苦整理！轉載請註明來自http://www.zqshzb.com/n1b/3026.html