生物質熱風爐的運轉要嚴厲依照運用說明

燃氣壁掛熱風爐構造方式有三有些構成焚燒設備、換熱設備、自動控制和安全保護裝置。焚燒設備首要是由燃氣焚燒器、焚燒裝置、焚燒室、送風與排煙系統構成。壁掛熱風爐的內部換熱設備中最簡單的是選用套管換熱器，也即是日子熱水套在采暖換熱器內，直接由火來加熱，其特點是構造簡單、出熱水快、報價低，我公司經營的是大品牌的商品，功能安穩，質量牢靠，歡迎您的挑選。
There are three construction modes of gas wall-mounted hot blast stove: incineration equipment, heat exchange equipment, automatic control and safety protection device. Incineration equipment is mainly composed of gas burner, incineration device, incineration chamber, air supply and smoke exhaust system. The simplest internal heat exchanger of wall-mounted hot stove is casing heat exchanger, that is, daily hot water jacket in the heating heat exchanger is heated directly by fire. Its characteristics are simple structure, fast hot water output and low quotation. Our company operates large-brand goods with stable functions and reliable quality. Welcome your selection.
而跟著附著在換熱器內壁上的水垢不斷加厚，換熱器管徑便會越來越細，水流不暢，不隻增加瞭水泵及換熱器的擔負，並且壁掛爐的換熱效率的也會大大下降，首要表現為壁掛爐耗氣量增大、供熱缺乏、清潔熱水時冷時熱、熱水量減小等表現。對壁掛爐的損害是十分兇猛的，特別是板式換熱器的損害更大。
With the increasing scale attached to the inner wall of heat exchanger, the diameter of heat exchanger tube will become thinner and thinner, the flow of water is not smooth, not only increases the burden of pumps and heat exchangers, but also greatly reduces the heat transfer efficiency of wall-mounted 透水地坪furnace. The main manifestations are the increase of gas consumption of wall-mounted furnace, the lack of heat supply, and the heat and heat during cold and hot water cleaning. Decrease in water volume and other performance. The damage to wall-hanging furnace is very fierce, especially to plate heat exchanger.
有些小型燃氣熱風爐沒有自動控制系統，需求人工焚燒，手動操作，要做好焚燒前的各種查看：水、氣、電開關處於準確方位；嚴厲遵守操作規程：翻開爐門，進行爐內吹掃；站在安全方位點燃主焚燒器，躲開爐門或噴火孔，防止爐火傷人；待焚燒正常後封閉爐門；發現不正常，迅速封閉氣源閥門，緊迫停爐，查找因素，排除故障後，方可再投入運轉。
Some small gas hot blast stoves do not have automatic control system, which requires manual incineration and manual operation. Before incineration, all kinds of checks should be done: water, gas and electric switches are in the correct position; strict compliance with the operating rules: open the furnace door, sweep the furnace; stand in a safe position to ignite the main incinerator, avoid the furnace door or spray hole. To prevent burning injury; to close the door after normal incineration; to find abnormal, quickly close the gas source valve, stop the furnace urgently, find out the factors, after troubleshooting, can be put into operation again.
生物質熱風爐的裝置、修理、改造。從事熱風爐的裝置、修理、改造的單位應當獲得省級質量技術監督局頒佈的特種設備裝置修理資格證書，方可從事熱風爐的裝置、修理、改造。熱風爐出廠時應當附有“安全技術規范請求的規劃文件、商品質量合格證實、安全及運用修理闡明、監督查驗證實”。熱風爐的運轉要嚴厲依照運用說履行，盡量防止超負荷工作，確保安全。
Installation, repair and modification of biomass hot blast stove. Units engaged in the installation, repair and renovation of hot stoves shall obtain the certificate of qualification for repair of special equipment and devices issued by the Provincial Quality and Technical Supervision Bureau before they can engage in the installation, repair and renovation of hot stoves. When the hot blast stove leaves the factory, it shall be accompanied by "the planning documents requested by the safety technical specifications, the certification of commodity quality, the clarification of safety and operation, repair, supervision and verification". The operation of hot blast stoves should be strictly carried out according to the operation theory, and the overload should be prevented as far as possible to ensure safety.
哪裡有熱風爐賣？熱風爐的保護養護應該是全方位的對熱風爐進行查看、清潔、養護，包含水道、電路、氣路、焚燒有些及相幹配件等方面。熱風爐的保護養護通常為一年一次或兩年一次，保護內容首要有；熱風爐定時的保護養護，能夠延伸熱風爐運用的生計的年限，進步熱風爐的工作效率，減少故障發生率，有利於熱風爐沒事瞭安全運轉。
Where are hot stoves for sal环氧地坪e? The protection and maintenance of hot blast stove should be a comprehensive inspection, cleaning and maintenance of hot blast stove, including water channel, circuit, gas path, incineration and some related accessories. The protection and maintenance of hot stove is usually once or twice a year, and the primary protection content is the regular protection and maintenance of hot stove, which can extend the life of hot stove, improve the working efficiency of hot stove, reduce the incidence of failure, and help the safe operation of hot stove.