廠傢總結熱風爐安裝的主要過程【推薦】

熱風爐安裝的主要過程一、熱風爐在投入使用前或者投入使用後30日內，特種設備使用單位應當向直轄市或者設區的市的特種設備安全監督管理部門登記。登記標志應當置於或者附著於該特種設備的顯著位置。二、熱風爐的安裝、改造、維修竣工後，安裝、改造、維修的施工單位應當在驗收後30日內將有關技術資料移交使用單位，
The main process of installation of hot-blast stoves 1. Before or within 30 days after the hot-blast stoves are put into use, the users of special equipment shall register with the special equipment safety supervision and administration departments of municipalities directly under the Central Government or cities with districts. The registration mark shall be placed in or attached to the prominent position of 透水地坪the special equipment. 2. After the installation, transformation and maintenance of the hot blast stove have been completed, the construction unit that installs, transforms and maintains the hot blast stove shall transfer the relevant technical data to the user within 30 days after acceptance.
三、熱風爐安裝、改造、維修的施工單位應當在施工前將擬進行的特種設備安裝、改造、維修情況書面告知直轄市或者設區的市的特種設備安全監督管理部門，告知後即可施工。
3. Construction units that install, renovate and maintain hot blast stoves shall inform the special equipment safety supervision and management departments of municipalities directly under the Central Government or municipalities with districts in writing about the installation, renovation and maintenance of the special equipment to be carried out before the construction, and the construction can be carried out after the notification.
四、熱風爐的設計、制造、安裝、改造、檢驗檢測實行生產許可證制度。
4. The production license system shall be applied to the design, manufacture, installation, transformation, inspection and inspection of hot stoves.
五、熱風爐選址應在廠區常年最多風向的下風口。
5. The location of hot blast stove should be at the downwind outlet with the largest wind direction in the factory area all the year round.
六、蒸汽熱風爐產品出廠時，必須附有與安全有關的技術資料，其內容應包括：
6. When steam hot stove products leave the factory, they must be accompanied by safety-related technical information, which should include:
??1.熱風爐圖樣（包括總圖、安裝圖和主要受壓部件圖）；
Hot stove drawings (including general drawings, installation drawings and main compressed parts drawings);
??2.受壓元件的強度計算彩色沥清地坪書或計算結果匯總表；
_2. Strength calculation or summary table of calculation results of compressive components;
??3.安全閥排放量的計算書或計算結果匯總表；
_3. Computation sheet or summary table of calculation results of relief valve discharge;
??4.熱風爐質量證明書（包括出廠合格證、金屬材料證明、焊接質量證明和水壓試驗證明）；
_4. Hot blast stove quality certificate (including factory qualification certificate, metal material certificate, welding quality certificate and water pressure test certificate);
??5.熱風爐安裝說明書和使用說明書；
Installation instructions and operation instructions for hot stoves;
??6.受壓元件重大設計更改資料。
_6. Major design changes of pressurized components.