操作工業熱風爐之前的相關檢查工作有哪些？

工業熱風爐在我們的日常生活中，主要是對動力進行提供的一款重要設備，而正確的操起是保證工業熱風爐有效運行的必要因素，那麼我們在操作工業熱風爐之前，都有哪些需要準備的工作呢？又有哪些相關的檢查工作呢？針對工業熱風爐需要對其進行全面的檢查，如果是重新啟動，或者是新安裝和檢修後的工業熱風爐來說，對其進行全面的檢查是非常有必要的彩色沥清地坪，主要是對熱風爐的外部和內部進行檢查，檢查的項目包含的有閥門、擋板、鍋體、安全的附件和儀表等。
In our daily life, the industrial hot stove is an important equipment to provide power, and the correct operation is the necessary factor to ensure the effective operation of the industrial hot stove. So what work should we prepare before operating the industrial hot stove? What related inspections are there? In view of the need for a comprehensive inspection of industrial hot stoves, if it透水地坪 is restarted or newly installed and repaired, it is necessary to carry out a comprehensive inspection of the industrial hot stoves, mainly for the external and internal inspection of the hot stoves. The inspection items include valves, baffles, pot bodies, etc. Safety accessories and instruments, etc. 而工業熱風爐的內部受熱面積，相關的燃燒系統，以及煙道和承壓的部件等都需要進行詳細的檢查，保證工業熱風爐的內部和外部都處於正常的狀態，這樣操作的過程中，才能保證工業熱風爐不會出現故障，並保證其正常的運行。
The internal heating area, combustion system, flue and pressure components of industrial hot blast stove need to be inspected in detail to ensure that the internal and external of industrial hot blast stove are in a normal state. Only in this way can the industrial hot blast stove not fail and ensure its normal operation. That's ok.
為瞭預防工業熱風爐在運行的時候因為高溫而出現剛度的膨脹，在開啟熱風爐之前就應該對其進行提前上水，主要是為瞭降低熱應力的提升，導致其出現迅速的膨脹，並出現水位偏高的現象；而且烘爐也是比較重要的，避免出現高溫的煙氣，導致其出現變形、破裂和爆炸等事故。
In order to prevent the stiffness expansion of industrial hot blast stoves due to high temperature in operation, it is necessary to water them in advance before the start of hot blast stoves, mainly in order to reduce the increase of thermal stress, resulting in rapid expansion and high water level; furthermore, baking is also important to avoid the expansion. The high temperature flue gas leads to deformation, rupture and explosion accidents.
將工業熱風爐受熱面進行除銹，清除工業熱風爐表面的油跡和污垢，可以采用煮爐的凡是，將熱風爐在整體的蒸汽品質上進行有效的提升；當所有的檢查工作結束之後，開始對熱風爐進行點火，保證溫度緩慢持續的上升，促使熱風爐可以在升溫上比較均勻。
If the heating surface of industrial hot-blast stove is rusted and the oil and dirt on the surface of industrial hot-blast stove are removed, the hot-blast stove can be effectively upgraded in the overall steam quality by boiling stove. After all the inspection work is finished, the hot-blast stove is ignited to ensure that the temperature rises slowly and continuously to promote it. Hot blast stove can be more uniform in heating.
千萬不可以出現工業熱風爐突然升溫的現象，避免對其造成爆裂；還需要對工業熱風爐進行暖管，在完成點火之後，因為溫度會不斷的上升，預防其存在受熱不均的現象，所以暖管是非常有必要的，避免造成工業熱風爐的管道和閥門出現損壞。
There must be no sudden temperature rise in industrial hot stoves to avoid bursting; there is also a need to warm up the industrial hot stoves, after ignition, because the temperature will continue to rise, to prevent the phenomenon of uneven heating, so it is very necessary to warm up the pipes, to avoid causing industrial hot stoves pipes. Damage to valve and valve.