正確使用離心風機的幾個小技巧

正確使用離心風機的幾個小技巧
即使你購買的是國內知名品牌的離心風機，但是用戶如果在使用中不嚴格按照使用說明的話，也會降低風機的使用效果，甚至縮短離心風機的使用壽命，這對於用戶來說也是一種很大的損失，正確的使用離心風機不僅僅能保證它的使用效果，還能在很大程度上延長風機的使用壽命，因此很多用戶都想知道究竟怎樣的使用才是最為正確的，才能把對風機的損傷降到最低呢?今天我們來介紹一些幾個使用離心風機的小技巧。相信隻要用戶掌握瞭這些肯定能在一定程度上提高風機的使用效率。
A few small techniques for the correct use of a centrifugal fan
Even if you buy a domestic famous brand of centrifugal fan, but if the user is not strictly in use in the use of instructions, it will also reduce the effect of the fan, and even shorten the service life of the centrifugal fan, which is also a great loss for the users. It is true that the use of centrifugal fans is not only guaranteed. It can also prolong the service life of the fan to a large extent, so many users want to know exactly what is the most correct use to minimize the damage to the fan. Today, we introduce some of the little tricks that use centrifugal fans. I believe that as long as the users have mastered these, they will improve the efficiency of the fan to a certain extent.
離心風機最先的使用是從它的啟動開始的。有時候會出現啟動失敗或者啟動時間非常長的問題，出現這個情況的原因有很多。如果電動機拖不動，就檢查安全機構的設定值;如果電動機額定功率過低，就更換電動機;如果起動程序不正確，就調整起動設備;如果當起動時功率消耗過大，就核實當起動時氣體流量控制機構是否處在關閉位置;如果轉子卡住瞭，就用手盤動風機以檢查和調查卡住原因(摩擦、有障礙物等);如果在電動機的接線處電壓過低，就檢查電源線電壓如損耗過大，加大電源線。很多時候用戶會發現葉輪總是在白白的消耗能量。氣體經由前蓋與集流器之間的泄露形成輪回活動。都要保持一定的間隙，離心風機的前蓋與集流器之間和機殼與轉軸之間。以保證風機旋轉的可靠性。這樣能在很大程度上緩解這個現象。
The first use of centrifugal fan is from its start. Sometimes there is a problem of startup failure or long start-up time. There are many reasons for this. If the motor is not dragged, check the set value of the safety mechanism; change the motor if the rated power of the motor is too low; if the starting program is not correct, adjust the starting equipment; if the power consumption is too large when starting, it will verify whether the gas flow control machine is in the closed position when starting, if the rotor is stuck. Use the hand fan to check and in印花地坪vestigate the causes of stuck (friction, obstacles, etc.); if the voltage in the wiring of the motor is too low, the power line voltage is inspected if the loss is too large and the power line is increased. Many times, users will find that the impeller is always consuming energy in vain. Gas flows through the leakage between the front cover and the collector. It is necessary to maintain a certain gap between the front cover and the collector of the centrifugal fan and between the shell and the rotating shaft. To ensure the reliability of the fan rotation. This can alleviate this phenomenon to a great extent.
離心風機在使用最常出現的問題就是風機的振動瞭，想要從根本上解決這個問題也不是一個簡單的事，但是如果降低風機的轉速是一個非常好的辦法，而這個辦法的效果也最為顯著。不過還需要用戶根據所使用風機的具體情況來判斷究竟使用什麼方法才能更加的合理。
The most common problem in the use of centrifugal fans is the vibration of the fan. It is not a simple thing to solve the problem fundamentally, but it is a very good way to reduce the speed of the fan, and the effect环氧地坪 of this method is the most obvious. However, it is also necessary for users to decide which method to use in order to be more reasonable according to the specific conditions of the blower used.
辛苦整理！轉載請註明來自http://www.wxmlfj.com/faq/20.html