如何來選擇合適的环氧地坪類型？

如何從环氧地坪的环氧地坪表面紋理型和光亮型來選擇合適的环氧地坪類型：角度不同選擇的环氧地坪類型也是不同的。 环氧地坪根據其地坪表面表現出的癥理而分為光亮型和紋理型。其中光亮型环氧地坪是指漆膜表面平整，鏡向反射效果好；而紋理型环氧地坪是指漆膜表面出現紋路，表現為漫發射特征。大傢喜歡光亮還是紋理完全是個人的喜好，對环氧地坪的實質是沒有影響的。
How to choose the appropriate type of epoxy floor from the texture and brightness of the surface of the epoxy floor: the type of floor selected from different angles is also different. The epoxy floor is divided into bright and textural types according to their symptoms. The bright epoxy flooring refers to the smooth surface of the paint film with good mirror reflection effect, while the textured epoxy flooring refers to the appearance of lines on the surface of the paint film, showing diffuse emission characteristics. Whether you like light or texture is entirely your personal preference. It has no effect on the essence of epoxy flooring. 环氧地坪一般环氧面層的厚度很小，面層环氧對地坪的對其平整度的改善非常有限，所以地坪成品的平整度往往不是很好。特別當混凝土基層的平整度不好，环氧層的厚度又較小時，更是如此。表面光亮會把這種不平整的狀態更顯眼地表現出來，紋理型的漫發射特征，會從視角上顯得好一些。另外，环氧樹脂的耐劃傷性有限，越是光亮的表面越易劃傷，或同樣的劃傷顯得更明顯，紋理型相比就顯得耐用一些。
Epoxy flooring generally has a very small thickness of epoxy surface, and the surface epoxy improves the flatness of the flooring very limited, so the flatness of the finished flooring products is often not very good. Especially when the roughness of the concrete base is not good, the thickness of the epoxy layer is relatively small. Surface brightness will make this uneven state more obvious, texture diffuse emission characteristics will be better from the perspective. In addition, the scratch resistance of epoxy resin is limited, the brighter the surface is, the easier the scratch, or the same scratch is more obvious, texture type is more durable.
光亮型环氧地坪
Bright epoxy floor
如果從技術的角度來說，紋理型更接近环氧樹脂的特征。环氧地坪所用的环氧樹脂，是常溫固化的液透水地坪體樹脂，是高度交聯的反應性樹脂。由於分子量大、反應放熱、粘度大、收縮等因素的影響，真正的薄塗性环氧樹脂表面很難形成鏡面效果，隻有當面層很厚時才能形成鏡面效果。
From a technical point of view, texture is closer to the characteristics of epoxy resin. The epoxy resin used in epoxy flooring is a liquid resin cured at room temperature and a highly cross-linked reactive resin. Due to the influence of molecular weight, exothermic reaction, high viscosity, shrinkage and other factors, it is difficult to form mirror effect on the surface of real thin-coated epoxy resin. Mirror effect can only be formed when the surface layer is very thick.
紋理型环氧地坪
Textured epoxy floor
环氧自流平就是這樣，這就是自流平為什麼要有一定的厚度。因此真正的环氧樹脂，薄的時候光不瞭，厚的時候想不光都難，除非人為因素控制，如加入更多一些調整流動性的助劑或其它物質等等。這樣，材料中的环氧成分實際上變少瞭，長久性能是有所損失的。
Epoxy self leveling is the case, 彩色沥清地坪which is why the self leveling must have a certain thickness. Therefore, true epoxy resin can not shine when it is thin, and it is difficult to think when it is thick, unless controlled by human factors, such as adding more fluidity adjusting additives or other substances, etc. In this way, the epoxy component in the material is actually reduced, and the long-term performance is lost.