為什麼环氧地坪漆塗膜需要做質量檢測

环氧地坪漆塗裝質量控制和管理，可以分為环氧地坪漆塗料產品的質量控制和管理及塗裝施工的質量控制和管理，隻有兩者都達到瞭滿意的要求，才能達到預期的环氧地坪漆塗裝的目的。選用優質的地坪漆塗料是獲得高質量地坪漆塗膜的前提，但是在地坪漆塗料生產、貯存、運輸過程中，由於受各種环境條件和其他客觀因素的影響，其性能可能會發生變化。因此，檢驗地坪漆塗料產品是否在產品標準規定的技術指標范圍內，是地坪漆塗裝工作者所必須進行的工作。
The quality control and management of epoxy floor coatings can be divided into the quality control and management of floor coatings products and the quality control and management of coating construction. Only when both of them meet the satisfactory requirements can the desired purpose of floor coatings be achieved. Selection of high-qua透水地坪lity floor paint is the premise of obtaining high-quality floor paint film, but in the process of production, storage and transportation, due to various environmental conditions and other objective factors, its performance may change. Therefore, it is necessary for floor paint coaters to inspect whet环氧地坪her the floor paint products are within the technical specifications specified in the product standards.
环氧地坪
Epoxy floor
對地坪漆塗膜性能進行檢測，不但可以確定地坪漆塗裝施工是否達到瞭塗裝的技術標準，而且還有助於發現地坪漆塗裝施工中存在的問題，如對地坪漆塗膜性能檢測發現附著力差時，在排除地坪漆塗料產品本身的附著力因素外，若是地坪漆塗膜與基體間產生脫落現象，則可以認為是預處理不當或是選擇地坪漆塗料不當;若是產生地坪漆塗層之間脫落現象，則可能是選擇的地坪漆塗料的配套性不好，或是施工不當。
Testing the coating performance of floor paint can not only confirm whether the coating process meets the technical standards, but also help to find out the problems existing in the coating process. For example, when the poor adhesion is found in the testing of the coating performance of floor paint, the adhesion factors of floor paint products are excluded. If there is a shedding phenomenon between the coating film and the substrate, it can be considered that the pretreatment is improper or the selection of the floor paint is improper; if there is a shedding phenomenon between the floor paint coatings, it may be the choice of the floor paint coating compatibility is not good, or improper construction.
為瞭幫助使用地坪裝飾保護塗料的顧客正確地選擇地坪的種類和有效控制建設成本，建議顧客最好從以下幾個因素入手：
In order to help the customers who use floor decorative protective coatings choose the types of floor correctly and control the construction cost effectively, it is suggested that the customers should start with the following factors:
一、機械性能要求
I. mechanical performance requirements
主要以下三個方面：
The following three aspects:
1. 耐磨性：地坪在使用時會有哪些車輛行走?
1. wear resistance: what vehicles will be used when the floor is used?
2. 耐壓性：地坪在使用時會承受多大荷載?
2. pressure resistance: how much load will the floor take when it is used?
3. 耐沖擊性：沖擊力是否會引起地坪面剝離?
3. impact resistance: will the impact force cause the peeling off of the terrace surface?
二、化學性能要求
Two. Chemical performance requirements
主要考慮以下兩個方面：
The following two aspects are mainly considered:
1. 耐酸堿性：使用時腐蝕性化學物質的種類及濃度。
1. acid and alkaline: the type and concentration of corrosive chemicals used.
2. 耐溶劑性：使用時溶劑類型及接觸時間。
2. solvent resistance: solvent type and contact time.