廠傢揭示如何對环氧地坪進行翻新技巧

环氧地坪是一種高強度、耐磨損、美觀的地板，具有無接縫、質地堅實、耐藥品性佳、防腐、防塵、保養方便、維護費用低廉等優點。可根據不同的用途要求設計多種方案： 如薄層塗裝，1-5mm厚的自流平地面，防滑耐磨塗裝，砂漿型塗裝，防靜電，防腐蝕塗裝等。每當环氧地坪在使用一段時間後，都需要進行翻新保養。那麼如何對环氧地坪進行翻新呢?下面就來為大傢介紹一下。
Epoxy floor is a kind of high-strength, wear-resistant, beautiful floor, with seamless, solid texture, good resistance to antisepsis, dust, easy maintenance, low maintenance costs and other 彩色沥清地坪advantages. It can be designed according to different application requirements: thin coating, 1-5mm thick self-leveling floor, anti-skid and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating and so on. Whenever the epoxy floor is used for a period of time, renovation and maintenance are needed. How to refurbish epoxy floor? Let's introduce below.
翻修的第一個步驟就是對舊环氧地坪進行清理。我們在對环氧地坪翻新的時候，在清理時需要使用專業的环氧消磨設備對舊环氧地坪進行清除。完成清理工作後，再根據不同的环氧地坪漆的類型進行施工。
The first step in the renovation is to clean up the old floors. When we renovate the epoxy floor, we need to use professional epoxy abrasion equipment to clean the old floor. After completion of the cleaning work, construction will be carried out according to different types of epoxy floor paint.
第二步對地坪表面的油污進行清理。如果表面污垢較多，需配合用清洗劑來進行脫油、脫脂，隻有在確定表面幹凈後才可進行接下來的施工。
The second step is to clean up the oil pollution on 印花地坪the surface of the floor. If there is a lot of dirt on the surface, it is necessary to use a cleaning agent to degrease and degrease, and the next construction can be carried out only after the surface is determined to be clean.
當完成以上兩個步驟後，我們就可正式開始修補工作瞭。如果原先环氧地坪的施工質量和塗料的材質很差，就會給修補工作帶來很多的問題。比如，裂縫。一旦出現裂縫，可使用切割機將有裂縫的地面切成V槽，然後將环氧砂漿灌入，再將地面弄平整。
When the above two steps are completed, we can officially begin the repair work. If the quality of the original epoxy floor construction and paint material is very poor, it will bring a lot of problems to the repair work. For example, cracks. Once cracks occur, you can use a cutter to cut the cracked ground into V slots, and then epoxy mortar grouting, and then leveling the ground.
最後一步就是對坑窪出進行處理。由於劣質的环氧地坪一步會造成表面鼓起的現象，我們可以用打磨機對其進行打磨。
The last step is to handle the potholes. Because poor epoxy floors cause bulging in one step, we can use a grinder to grind them.