施工時怎麼解決环氧地坪漆有油的情況

环氧地坪塗料對混凝土等多種底材的附著力優良、固化收縮率低;具有良好的耐水性、耐油性、耐酸堿性、耐鹽霧腐蝕等化學特性;同時具有優良的耐磨性、耐沖壓性、耐洗刷性等物理特征;在使用時不易產生裂紋且易沖洗、易維修保養.但环氧地坪塗料耐候性和韌性較差.對环氧樹脂進行改性或將环氧樹脂與其他樹脂進行復配並用,可提高其耐候性和柔韌性,拓展其應用領域.隨著人們环保意識的增強,開發水性环氧地坪塗料、高固體分环氧地坪塗料、無溶劑环氧地坪塗料是环氧环氧地坪塗料未來的發展方向.清理地面：在施工前要對地面進行處理，清除雜質。並且對舊地面的機器設備做好保護工作。
Epoxy floor coating has excellent adhesion to concrete and other substrates, low curing shrinkage, good water resistance, oil resistance, acid and alkali resistance, salt spray corrosion resistance and other chemical characteristics; at the same time, it has excellent wear resistance, stamping resistance, wash resistance and other physical characteristics; it is not easy to crack and easy to wash, easy to maintain. Maintenance. But the weather resistance and toughness of epoxy floor coatings are poor. Modification of epoxy resins or blending of epoxy resins with other resins can improve their weather resistance and flexibility, and expand their application fields. With the increasing awareness of environmental protection, waterborne epoxy floor coatings, high solid epoxy floor coatings, insoluble Agent epoxy floor coatings is the future dev印花地坪elopment direction of epoxy floor coatings. Clean the ground: before the construction of the ground treatment, remove impurities. And protect the machinery and equipment on the old ground.
油污清除：在有油污的地方可以采用人工清除，或者使用烤槍對明顯的油污進行燒除。鹽酸沖洗。主要起到一個除油的作用。鹽酸的濃度不能太高，用到4~5%即可。對於油污較重的地方，可以多推幾次。使用這個方法要註意安全、通風，如果不小心被鹽酸濺到，需要用大量的水沖洗。堿洗地面。使用一公斤的燒堿與20公斤的水混合，刮塗地面，目的是為瞭中和透水地坪地面的鹽酸，但是，鹽酸的量不能大於堿洗，因為环氧环氧地坪耐酸不耐堿。
Oil stain removal: where there is oil stain can be artificially removed, or use a baking gun to remove the obvious oil stain. Rinse with hydrochloric acid. It plays an important role in removing oil. The concentration of hydrochloric acid should not be too high, 4~5% can be used. For heavy oil contaminated areas, it can be pushed several times. Use this method to pay attention to safety, ventilation, if accidentally splashed by hydrochloric acid, need to be washed with a lot of water. Wash the ground with alkali. Use a kilogram of caustic soda mixed with 20 kilograms of water, scraping the floor, the purpose is to neutralize the ground hydrochloric acid, but the amount of hydrochloric acid can not be greater than alkali washing, because the epoxy floor acid is not alkali-resistant.
打磨處理：使用打磨機將地面被腐蝕的水泥和油污打磨掉，然後用大量的水沖洗地面。
Grinding: Use a grinder to grind the ground away from corroded cement and oil, and then rinse it with a lot of water.
幹燥處理：如果通風較好的話地面一般兩天就可以幹瞭，等待幹燥後就可以進行环氧地面施工，不好的情況就要一周，可以使用空調或抽濕機處理。
Drying treatment: If the ground is well ventilated, the general two days can be dry, waiting for drying can be carried out on the epoxy floor construction, bad conditions will be a week, you can use air conditioning or dehumidifier treatment.