环氧地坪施工省錢又省力的技巧【用戶須知】

环氧地坪項目施工時，底漆層的塗佈是环氧地坪施工過程中最基礎的一步。底漆層處於环氧地坪基面與环氧地坪塗層之間，這樣可以增強环氧地坪塗層與地面的附著力。那麼，可能有人會問环氧地坪底漆的使用量究竟多少才算合適呢?其實，环氧环氧地坪底漆的使用量是受多種因素影響的。
In the construction of epoxy floor project, primer coat is the most basic step in the construction of epoxy floor. The primer layer is located between the epoxy floor coating and the base surface of the floor, which can enhance the adhesion of the epoxy floor coating to the ground. Then, some people may ask how much is the use of epoxy floor primer appropriate? In fact, the use of epoxy floor primer is affected by a variety of factors.
1、地面強度
1. Ground strength
影響环氧地坪底漆使用量的最主要因素是地坪施工基面的粘結強度，進而影響整印花地坪體的強度。施工环氧地坪的時候一般要求混凝土地面的強度大於C25，較好的地面中底漆用量一般在0.05~0.2kg/m2，若地面強度過低，地面疏松，易起砂，則环氧地坪底漆的使用量則會根據實際环境跟情況而改變用量。
The most important factor affecting the use of epoxy floor primer is the bond strength of the floor construction base, and then affects the overall strength. In the construction of epoxy floor, the strength of concrete floor is generally greater than C25, and the amount of primer used in the better floor is generally 0.05-0.2 kg/m2. If the ground strength is too low, the ground is loose and easy to sand, the amount of primer used in the epoxy floor will be changed according to the actual environment and the situation.
此外，如果地坪施工基面強度低，但又沒有塗佈適當適量的环氧地坪底漆來增加地坪基面粘結強度，則环氧地坪質量較差。如果地坪上有叉車等重物時，环氧地坪就可能會連同环氧地坪基面一起被壓陷拉裂。
In addition, the quality of epoxy floors is poor if the base strength of floor construction is low, but the epoxy floors are not coated with proper amount of epoxy primer to increase the adhesion strength of the base. If there is a forklift on the floor, the epoxy floor may be collapsed and cracked together with the epoxy floor.
因此，在环氧地坪施工時，一定要保證底漆的塗佈量適量。如果地面整體強度過低，則可根據承重及強度要求選用环氧塗層，或者有條件的可重新進行地面改造。
Therefore, in the construction of epoxy floor, we must ensure that the amount of primer coating is moderate. If the overall strength of the ground is too low, epoxy coating can be selected according to the load-bearing and strength requirements, or the ground can be reconstructed conditionally.
2、地面磨損程度
2. Ground wear degree
新舊地面，當然磨損程度不一樣，舊地面根據使用時間長短及各種承載使用程度的不同，其地面的損壞程度也跟著不一樣，有時候地面會出現大面積的坑坑窪窪和裂縫等問題，因此在施工环氧底塗之前一定要對進行地面的修補，對裂縫及坑洞修復及地面平整度的控制都相當的有必要。在面對一個較新地面环境，其地面強度及平整度較好時，一般的用量控制在0.05~0.2kg/m2范圍;而面對老舊地面，地坪專業技術人員會結合實際情況為您的地坪控制用料，考慮客戶考慮不到的。
New and old ground, of course, the degree of wear and tear is different, the old ground according to the length of use and the different degree of use of various loads, the degree of damage to the环氧地坪 ground is also different, sometimes the ground will appear in a large area of pits and cracks and other issues, so in the construction of epoxy primer must be before the ground repair It is necessary to control cracks and holes and control the surface evenness. In the face of a relatively new ground environment, its ground strength and smoothness is better, the general dosage is controlled in the range of 0.05-0.2 kg/m2; and in the face of the old ground, the floor professional and technical personnel will take into account the actual situation for your floor control materials, considering customers can not consider.