淺談环氧地坪的應用范圍是怎樣的？

环氧地坪漆作為裝飾性非常好的环氧地坪材料，不僅外表美觀，還能非常長久的保持效果，因此受到廣泛應用。而要想环氧地坪漆更好的發揮效果，它的厚度非常關鍵，在不同場所它適合的厚度也不同，選擇適合的厚度不僅可以提高地坪漆的作用效果，還可以減少許多施工不便的麻煩。
Epoxy floor paint as a very decorative floor material, not only beautiful appearance, but also very long-term maintenance effect, so it is widely used. In order to make the floor paint work better, its thickness is very important. The suitable thickness is different in different places. Choosing the suitable thickness can not only improve the effect of floor paint, but also reduce the inconvenience of construction. 如果是機械制造企業廠房地面，或者車間產品比較重、需要經受各種車輛（如汽車、叉車、推車等）的碾軋，則地面的承載力要求較高。濟南地坪可以選擇做一遍底漆、一遍中塗砂漿、一遍中塗膩子和兩遍面漆的环氧砂漿地坪，厚度在1.0-3.0mm左右，根據地面承重載重需求，噸左右以上建議做1mm环氧砂漿地坪，2噸左右建議做2mm厚的环氧砂漿地坪。另外，叉車輪子彩色沥清地坪建議換成橡膠輪，減少對地面的劃傷損害。
If the floor of a factory building in a mechanical manufacturing enterprise, or the products in the workshop are relatively heavy and need to be rolled by various vehicles (such as automobiles, forklifts, carts, etc.), the bearing capacity of the floor is required to be higher. Jinan floor can choose to make one-time primer, one-time intermediate mortar, one-time intermediate putty and two-time topcoat epoxy mortar floor. The thickness of the epoxy mortar floor is about 1.0-3.0 mm. According to the load-bearing demand of the ground, it is suggested to make 1 mm epoxy mortar floor above one ton and 2 mm thick epoxy mortar floor about two tons. In addition, forklift wheels are suggested to be replaced by rubber wheels to reduce scratch damage to the ground.
如果地面走幾十噸的貨物，建議做3-5mm的环氧砂漿地坪，並且要求基層地面的輕度非常好，不然环氧地坪漆做的再厚，基層被壓爛一樣會在導致地坪漆脫層。如果是辦公室等主要走走人的地面，混凝土地面強度在C25以上且收瞭光的，濟南地坪可以選擇做一遍底漆、一遍中塗膩子和兩遍薄塗面漆的环氧薄塗地坪，厚度在0.5-0.8mm左右，非常的經濟實用。
If dozens of tons of goods go on the ground, it is recommended to make 3-5mm epoxy mortar floor, and the requirements of the grass-roots floor is very mild, otherwise the epoxy floor paint is made thicker, the grass-roots will be crushed, which will lead to印花地坪 the floor paint delamination. If the office and other people mainly walk on the ground, the concrete floor strength is above C25 and the light is collected, Jinan floor can choose to do a primer, a putty and two times of thin coated epoxy floor, the thickness of which is about 0.5-0.8 mm, which is very economical and practical.