廠傢解讀標準電子產品老化房須知

老化房，又稱燒機房，是各種老化試驗中常用設備之一，廣泛應用於電子、電腦、通訊等領域。老化房通常由圍護結構、風道系統、控制系統、室內測試架構等組成。控制系統：老化房的控制系統采用PLC通過程序進行控制，控制系統中采用瞭兩級PID調節加熱量，實現對房間溫度的精確控制，同時溫度控制器可以對房內任意六點溫度進行滾動實時顯示,方便客戶準確掌握房內溫度情況。控制系統還設定瞭各種保護功能，有超溫報警保護、風機故障報警保護、無風報警保護、室內煙氣感應報警保護等，完善的保護功能確保瞭老化房能長期穩定無故障運行。
Aging room, also known as burning machine room, is one of the common equipment in various aging tests, which i彩色沥清地坪s widely used in the fields of electronics, computers, communications and so on. The aging room is usually composed of enclosure structure, air duct system, control system, indoor test structure and so on. Control system: The control system of aging room is controlled by PLC through program. Two-stage PID is used in the control system to adjust the heating quantity, so as to realize the accurate control of room temperature. At the same time, the temperature controller can display the temperature of any six points in the room in real time, so as to facilitate customers to accurately grasp the temperature situation in the room. The control system also sets up various protection functions, such as overtemperature alarm protection, fan fault alarm protection, windless alarm protection, indoor smoke induction alarm protection, etc. The perfect protection function ensures the long-term stable and trouble-free operation of the aging room.
風道系統：
Air duct system:
通常加熱風機及風道系統安裝於老化房頂部，不占用其它空間，一般風道系統由循环風系統及過熱排風系統組成，室內循环風經加熱器加熱後由送風機經保溫風管送回室內，反復循环，使房間溫度維持在設定范圍。當房間溫度超過報警設定值時，排風機啟動，抽走室內過熱氣體，同時室外冷空氣進入房內與熱空氣混合，使房間溫度回復
Usually, the heating fan and the air duct system are installed on the top of the aging room without occupying any other space. The general air duct system consists of the circulating air system and the superheated exhaust air system. After heating by the heater, the indoor circulating air is sent back to the room by the air supply fan through the insulating air duct and circulated repeatedly, so that the room temperature is maintained within the set range. When the room temperature exceeds the alarm setting value, the exhaust fan starts, and exhausts the overheated gas in the room. At the same time, the outdoor cold air enters the room and mixes with the hot air, so that the room temperature can be restored.
圍護結構：
Enclosure structure:
老化房圍護結構一般环氧地坪采用保溫板（雙面彩色鋼板，中間加保溫材料）在現場拼裝而成，房間尺寸均根據客戶要求設計。整個房間外表美觀，結構牢固，同時安裝方便快捷，施工期短。在房間墻上，根據需要可設置觀察窗，方便在室外觀察到室內產品測試情況。在墻上還配有不同電壓的插座，以滿足產品老化測試時的需要。
The enclosure structure of aging house is usually assembled on site with insulation board (double-sided color steel plate, with insulation material in the middle), and the room size is designed according to customer's requirements. The whole room has beautiful appearance, firm structure, convenient installation and short construction period. On the wall of the room, the observation window can be set up according to the need to facilitate the inspection of indoor product testing in the outdoor. The wall is also equipped with different voltage sockets to meet the needs of product aging testing.
辛苦整理！轉載請註明來自http://www.chinasavant.cn/show.asp?id=127