环氧地坪施工為什麼會有刷痕？怎麼處理？

是否為环氧地坪施工後會出現刷痕而煩惱過，环氧地坪施工完成後，表面應該是平整光滑的，但是對於有些施工不是很好的环氧地坪來說，很多环氧地坪表面會出現刷痕，影響环氧地坪的外觀質量。那麼，你知道环氧地坪刷痕產生的主要原因嗎？刷痕該如去何解決？环氧环氧地坪刷痕產生的原因：
Whether there will be brush marks after the construction of epoxy floors and worry about, after the completion of the construction of epoxy floors, the surface should be smooth, but for some construction is not very good epoxy floors, many floors will appear brush marks, affecting the appearance of the quality of epoxy floors. Well, do you know the main reason for the epoxy floor brush marks? How to solve the brush marks? Causes of epoxy floor brush marks:
第一：材料質量：环氧地坪漆材料本身是低質次品，它的粘度過高，流平性差，造成环氧地坪漆施工後有刷痕出現。
First: Material quality: Epoxy floor paint itself is a low-quality inferior product, its viscosity is too high, poor leveling, resulting in the epoxy floor paint after the construction of brush marks.
第二：施工原因:环氧地坪漆施工的方法錯誤；配好漆後沒有及時使用造成漆料凝固；塗層過薄。
Second: construction reasons: epoxy floor paint construction method error; matched with the paint did not use in time resulting in paint solidification; coating is too thin.
第三：工具原因:滾筒質量不合格，滾筒表面處理有異物 。
Third: tool reason: drum quality is unqualified, roller surface treatment has foreign body.
解決的方法：
Solution:
第一：塗料的原因，增加塗料的流平性，降低塗料的粘度，盡可能減少有觸變性的填料和助劑，特別要留意墻面塗料的流平劑用在地坪塗料的現象。
First: the reason for the coating, increase the leveling of the coating, reduce the viscosity of the coating, as far as possible to reduce the thixotropic fillers and additives, especially pay attention to the wall coating leveling agent used in floor coating phenomenon.
第二：环氧地坪留意施工方法，塗料的熟化時間不要過長。滾筒的二端到圓角，塗層的一遍厚度盡可能不要小於0.15mm。
Second: epoxy floor pay attention to the construction method, the curing time of the paint should not be too long. The two ends of the drum to the fillet, the th环氧地坪ickness of the coating should not be less than 0.15mm as much as possible.
第三：買好一點的滾筒，滾筒運用前用膠帶處理一下滾筒外表。
Third: buy a bit of rol彩色沥清地坪ler, roller before using the tape to deal with the appearance of the cylinder.